Kundeanmeldelser for VEVOR presisjonsfresemaskin-skrustikke 4 tommers akku-lås svingbar base klemmeskrustikke 360 ​​graders skala benk-skrustikke 100 mm bredde for fresing, boremaskin, presisjonsdeler, etterbehandling

TL-DR: I'm overall satisfied because I expected that the price meant I was getting a fairly decent casting, machined and ground that requires further cleaning, deburring and refinement. The paint is very decent and overall surface finish more than decent. - Received promptly in good condition by pure luck since there is ZERO protection in the box. - No rust on mine*, only grime and machining swarf and some sticky oil/grease partially dry. - *Not everything is coated and in a cold climate, it got full of condensation. Unpack, degrease and clean and coat with WD-40 immediately.* All the immediately visible machined surfaces look good, but EVERYTHING needs cleaning and DEBURRING. A complete teardown shows some casting defects (minor) and not as good machining where it is "hidden", and more involved deburring and filing is needed to address that. ***The nut that sets the pressure against the thrust bearing for the lead screw has 2 set screws which damage the threads. - The bearing and leadscrew need to be cleaned and re greased. - Yes, one can use it out of the box, it works, but it will probably grind itself over time and even draw blood when handling. Conclusion: After a couple of hours of tearing down, cleaning, deburring, filing some casting excess, filing the damaged threads near the handle, some wire wheeling and polishing, a nice waxing of all the non moving surfaces and oiling and re-greasing the leadscrew+ Nut and bearing, it works flawlessly.

The product is super, good work and finish is good.

Great Service fast and as stated. Machine is working well so far no complaints.

Very good quality and price.

La morsa Vevor è molto robusta, precisa e ben rifinita la consiglio.

Excellent value

Etau commandé pour la perceuse à colonne de la même marque acheté juste avant: très bien, facile d'utilisation. Seul regret: des "Té" (queues d'arondes) pourraient être fournis avec plutôt que ces ensembles vis-écrous qui eux ne sont pas très professionnels. J'ai rectifié cela en commandant le nécessaire sur un autre site et j'en ai profité pour acheter des mordaches magnétiques. Sinon très bien !

très bon rapport qualité/prix, finition parfaite et précision plus qu'acceptable. A l'utilisation, le serrage est très souple sans aucun point dur. Je m'en sert pour maintenir des pièces sur une machine à tarauder. Un petit détail, j'ai fais un trou taraudé dans l'emmanchement de la manivelle pour la maintenir en place sur le nez de la vis lors de la manipulation. L'emballage est parfait et la livraison rapide. Je recommande ce produit sans aucune réserve.

Etau de qualité a première vue, pas encore essayé.

Klasse Produkt. Für den Preis und unschlagbar. Präzision sehr gut und hat auch ein Niederzugesystem.