Kundeanmeldelser for VEVOR 5" superlås-skrustikke for NC/CNC-maskiner, benkklemme-skrustikke, høy presisjon, skrustikke, klemme-skrustikke, CNC-skrustikke, låsbar skrustikke, boring, 125 mm bredde, CNC 24KN
Kunde anmeldelser
Hvordan kundeanmeldelser og -vurderinger fungerer
Kundeanmeldelser, inkludert produktstjernevurderinger, hjelper kunder med å lære mer om produktet og avgjøre om det er det rette produktet for dem.
Den samlede vurderingen vår er ikke et enkelt gjennomsnitt. Vi prioriterer autentiske og troverdige anmeldelser og filtrerer ut duplikater eller ugyldig innhold før vi beregner den endelige poengsummen. Dette bidrar til å sikre at vurderingen virkelig gjenspeiler reelle kundeopplevelser.
Anmeld dette produktet
Del tankene dine med andre kunder
Skriv en anmeldelse
513 Anmeldelser
Anmeldelser for Gjeldende Produkt
Verifisert kjøp
Bilder og video kun
Oversett alle anmeldelser til Norsk (Berkmel)
Robert Nilsson Mr
Superbra till priset
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
A Jack of Many Trades 4 Inch Milling Vise with swivel base
TL-DR: I'm overall satisfied because I expected that the price meant I was getting a fairly decent casting, machined and ground that requires further cleaning, deburring and refinement. The paint is very decent and overall surface finish more than decent.
- Received promptly in good condition by pure luck since there is ZERO protection in the box.
- No rust on mine*, only grime and machining swarf and some sticky oil/grease partially dry.
- *Not everything is coated and in a cold climate, it got full of condensation. Unpack, degrease and clean and coat with WD-40 immediately.*
All the immediately visible machined surfaces look good, but EVERYTHING needs cleaning and DEBURRING.
A complete teardown shows some casting defects (minor) and not as good machining where it is "hidden", and more involved deburring and filing is needed to address that.
***The nut that sets the pressure against the thrust bearing for the lead screw has 2 set screws which damage the threads.
- The bearing and leadscrew need to be cleaned and re greased.
- Yes, one can use it out of the box, it works, but it will probably grind itself over time and even draw blood when handling.
Conclusion: After a couple of hours of tearing down, cleaning, deburring, filing some casting excess, filing the damaged threads near the handle, some wire wheeling and polishing, a nice waxing of all the non moving surfaces and oiling and re-greasing the leadscrew+ Nut and bearing, it works flawlessly.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Zac The product is super, good work and finish is good.
The product is super, good work and finish is good.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Bianca Ms
Great Service fast and as stated. Machine is working well so far no complaints.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Alain Etau de tabe 80 mm
Très content de cet étau robuste et prix très correct.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Otto Cat Owner
Very good quality and price.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
John Mr.
This was a heavy duty 6" vice that was worth the money I paid for it. John
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Dave Swan Mr
This is a great unit. Very heavy and I would say very precise. Good value , good product.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Lee M
Perfect for my needs I would recommend this
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
2AT Superintendent
Very well made use it quite a bit, satisfying
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
