Kundeanmeldelser for VEVOR bærbar oljebunnpanne med pumpe 64L oljebunnpanne 17 gallon lavprofil oljebunnpanne med 8' slange for SUV-bil og lastebiler

I really like the product. The idea is great and it’s really good when you have multiple oil changes to do one after the other. You don’t have to worry about emptying it every time like a normal drain pan thanks to the 15 gallon capacity. The pump works great, I empty the drain pan directly inside 5 gallon containers using the tube and I don’t make a mess on tye floor anymore thanks to the deep pan and mesh.

To start with, this is listed as a 15 gallon container... it is not! With 10 gallons in it, you cannot move it without oil sloshing out. Do not try to move it, just pump it out in place. The hose clamps they send are a joke. Don't dare use them. I use a wire clamper or sench tool I made. The hoses fit very loosely on the nipples and you have to squeeze them on tightly. 10 gallons of oil all over the ground would be a mess. It's not worth taking a chance. Also, Why do the Chinese not know how to make tapered pipe thread? You have to use about 6 to 8 times as much thread tape as you normally would to get these to seal, which they don't do until the fitting bottoms out. My modification to simplify the process, was to drill out a large nut with a 13/16 drill bit to fit over the shaft and put in a set screw in it. Then I weld a smaller nut om the front of that so I can put a socket and drill on to run the pump. I'm way too lazy to turn the handle by hand that many times.

Its not built same way as the website sample.. the drain was placed on wrong end causing them to put the pump on the same end as the handle...the fittings included does not fit the hoses ..

The hand crank was getting stuck and was very hard to crank, and eventually it broke.