Kundeanmeldelser for VEVOR 2 hk båndsliper med konstant hastighet, 2 x 82 tommers båndsliper med 3 slipeskiver, 110 V benksliper, 12 tommers hjul og flat plate, verktøystøtte for knivproduksjon

Just in light duty use but so far seems good, and is a nice little unit.

Ich habe diesen Bandschleifer seit eine Woche. Zuvor habe auf YouTube die Präsentation dieser Schleifer gesehen und kann nur bestätigen dass es Das Geld wert ist.

Awesome little grinder. It has the torque and power you need no doubt. I would have given it 5 stars but for the lack of working table on it and such a short stand, I'm giving it only 4. If your just getting into blade smithing, or just want a powerful little grinder that doesn't t take up much space, I do recommend it. It's worth every dollar spent.

As an entry level 2x72 grinder, this can not be beat. It is built well, and works as it should. The only reason it is not getting 5 stars, is sometimes it stalls when doing heavy grinding. If the pressure is too much the machine will shut down. The only other problem I had, was the weight. Unboxing it and carrying it to my grinder station was a harrowing task. Make sure you have a friend to help you. If you are looking for a price friendly start this is the machine for you for sure.

I bought this from Vevor It does a good job. I bought a secound one when the first one quit after 2 years of heavy use grinding knives and general shop use. This is why it quit. It needs dust proof connectors between the motor and controler. Only Vevor has this model with these open connectors. It allows metal dust inside the controler, which shorts it out. Locate the controler away from the sander. Put controler in a clear plastic bag. Tape or chalk bag around cables. You can remove speed knob with allen wrench. Make a small hole in bag to put shaft through. Reinstall knob. In Vevors other belt sanders the instructions tell you to protect the controler from metal dust. Take cover off of cable lead to motor. Seal it with RTV. Reinstall cover. This keeps metal dust out of motor. All other sellers of this sander use connectors that are dust proof. I don't know why Vevor changed to this type of connector. Buy the 3 year extended watrentee. Vevor does NOT sell parts.

This is a good little belt sander if you’re prepared to do few simple modifications to it. A lot of the screws holding it together are simply just to short. If you replace those with the appropriate length ones you’ll have a reliable machine. I purchased a pack of longer screws and cut them to the required size.

Das Gerät ist sauber verarbeitet, hat sich leicht montieren lassen. Der einzige Nachteil ist, daß die Regeltasten nicht reagieren. Schade, ansonsten würde es allen Erwartungen bis jetzt erfüllen

This one is a good addition to any shop,knife maker, or blacksmith. Easy to change belts or attachments. It needs a holder for the Allen wrench to change accessories and it also needs a bigger work table. The VFD will read HZ and not RPM no manual to explain the VFD but you get to know it with use. Some of the welds is a little bit questionable but holding for now if they need it later I will welds them then.

This is a really good general little belt grinder. Its small but don't let that fool you, It can grind a knife down, do bevels handle then sharpen it . It may take a little longer but if your in ance out hurry or production you should have gotten a professional one instead. This one is a good all around the shop grinder and belt swap is super easy..Two suggestions to make it better is a stiffer spring or a tension rod on the belt to keep it tighter and some bounce out of the belt. Also needs a bigger table or work on or offer a bigger add on.

Braucht noch etwas Fein Tuning. Die Bandspannung ist etwas zu hoch und es ist nicht alles im Winkel (eher Kosmetik) . Trotzdem perfekt fürs Geld.