Kundeanmeldelser for VEVOR vektfordelingstilhengerfeste, 1500 lbs vektfordelingstilhengersett med svingkontroll for tilhenger, 2-tommers solid stålskaft, 2-5/16 tommers legeringsstålkule, pulverlakkert lastutjevningstilhengerfeste, svart

While the hitch itself appears to be in good quality and solid construction. The support brackets used to hold up the tension bars are not. After only one short trip the bracket has become bent and unusable. Unfortunately it seems this is occuring to the brackets on both sides. Other brands appear to use thicker metal for these brackets providing more stability for the tension bars. See attached for photo.

Thought I was getting a 1500 lbs WDH. Turns out it is 15000, was not easy to find this out. this is over rated for what I need and they will so far not give me a refund. I am begging them at this point. We'll see what happens.

Purchased in Feb. 2025. Hooking and unhooking the hitch requires wrenching bolts every time. While cumbersome you get used to it. The major defect in this hitch is the manner in which the hitch angle is set. Most hitches use a post with washers for the top bolt so when everything is tightened the hitch cannot change the angle. This hitch uses a bolt you have to screw in/out to adjust the hitch angle. The problem is even when everything is tightened up the top bolt will screw in on its own and slowly relax the hitch angle. This started after a couple of months of use and was having to constantly reset the hitch angle and the bolt got progressively more difficult to adjust. The final straw was when taking the trailer on a trip the top bolt lost its threads.and the bolt was pushed all the way through the hole. Didn't check to see if the threads in the hole were stripped as well, but likely the case. We had to purchase a new hitch to get the trailer home. Having gone round and round with customer support the final thing they offered was paying to have it "repaired" or reimbursing me $25. Even if it can be "fixed" I wouldn't use it again and wouldn't want anyone else to take on the risk. This is going on the scrap metal pile.

Grosse deception à reception car l attelage n estpas compatible avec les attaches remorques européens standards style col de cygne , ce qui n est pas mentioné dans le descriptifdu produit. Il fautque le vehicule soit equipé d une attache remorque type américain , à savoir un embout carré de. 50 mm de. Coté dans lequel le support de la boule peut etre connecté et vissé. Dommage !!!!