Kundeanmeldelser for VEVOR 12U åpen ramme serverrack, 58,5–101,6 cm justerbar dybde, frittstående eller veggmontert nettverksserverrack, AV-rack med 4 stolper og hjul, rommer alt nettverksutstyret ditt, IT-AV-utstyr, ruter, modem

very good quality, a little heavy but otherwise very good and reasonable for the quality.

Das Server Rack ist für den Preis ein echter Schnapper. Das Rack ist stabl und hat genug Tiefe für einen Server (Dell R730), und sogar noch mehr. Der Aufbau ist einfach und schnell. Es werden genug Schrauben mitgeliefert. Der einzige Abzug ist, dass die Löcher für die Schienen ein wenig zu weit weg von der Kante sind und so die Rackschienen nicht im EasyClick System eingehängt werden können. Ein wenig Schleifpapier und ein bisschen Zeit, hilft aber, da nur die Lackierung im Weg ist.

Amazing ! work well

This "Open Frame Server Rack" is one of the most affordable I was able to find. The title at the time of purchase, which said '15"-40"', should be corrected to '23"-40"', however in my case this was perfectly fine. The rack is assembled with real screws, as advertised. You get mounting equipment which uses Allen key, which seems to be pretty common. Nothing bad with it so far, will see if things break in the future :P

The rack is easy to assemble and use. It’s very sturdy. As an optional feature, I think it would have been useful if it had come with some side panels.

I used this for a home server setup under some stairs. Good construction and ample depth for large UPS and Servers. Easy to construct - Brought back those Mechano feels.

Ist gut verarbeitet. Kann ich nur empfehlen. Betreibe 3 Dell PowerEdge Server darin. Würde ich auch wieder kaufen!

I am really surprised by this rack, when put together very sturdy, not expected below a $200 rack of the same stature.... I actually have started using more Vevor products as of late, they seem to be pretty darn good at a good cost, they also ship quickly.

got this to organize some of my home lab equipment. This is a workable inexpensive rack. You have to build it yourself and if you don’t have an electric screwdriver, your wrists will hate you. It works and it’s cheap. No side panels. Casters are solid and work well.

Purchased for a temporary project, this rack was used to hold three Lenovo servers, a PDU, a network switch, and patch panels on both sides. Assembly was straightforward, and I extended it nearly to its full length. I also had a woodworker make a custom tabletop for it, which turned out great and gave it a polished look. One note worth mentioning is that this was due to my own setup, not the build quality. After the project, when I removed the three Lenovo servers, I noticed the wheels had bent inward slightly. I had overloaded it by adding too much server weight and also placing an exceptionally heavy Alienware Area-51 on top. The wheels bent back without any problem, so it was ultimately not an issue.