Kundeanmeldelser for VEVOR 12U åpen ramme serverrack, 58,5–101,6 cm justerbar dybde, frittstående eller veggmontert nettverksserverrack, AV-rack med 4 stolper og hjul, rommer alt nettverksutstyret ditt, IT-AV-utstyr, ruter, modem

Super rack fiable et assez rigide pour mon imprimante 3d. Les trous des vis sont malheureusement trop petit et doivent être agrandis . A part ça tout est bon.

The VEVOR 12U Open Frame Server Rack, is a nice equipment rack, and seemingly serves its purpose. Putting the rack together, on the other hand, may also seem a bit of a challenge to some who are not so mechanically inclined. The directions are not all that informative - thankfully there are a few illustrations which give guidance to complete the assembly. The bulk package of screws which are necessary to construct the rack, are self-tapping, and are extremely difficult to turn with a screwdriver by hand - but once seated, they secure the pieces in place. For the money - and based on your individual needs or use for such equipment racks - this, VEVOR 12U Open Frame Server Rack, is priced to suit most needs of the user - perhaps more so from a studio (in my opinion) setting where the rack would be "stationed," as opposed to be expected to survive the rigors from being moved from state to stage, while on the road.

Easy to put together, easy to adjust. Make sure you know your server depth in advanced and measure out the length appropriately. Pay attention to the direction of the adjustable pieces, I got it wrong and had to take it apart. The quality of the top shelf is very poor, not strong enough for heavy items. Also if you make it longer than the shortest length, the top shelf does not span across the entire top (which makes sense or else it would stick out when not fully extended). Overall for the price, I honestly don't have a lot to complain about and it meets my needs! Highly recommend.

The metal plate that goes on the top was pretty badly damaged, the corner was bent meaning the plate had to be orientated in a certain way7 or it wouldn't fit. There is a lot of scrapes on the top plate. Everything else was alright, though the screws requiring an hex key is annoying, just use regular flat/phillips head screws.

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

I ordered my server rack and it arrived quickly. It definitely could've been packed a little bit better as there was some paint that had scraped off of it from rough shipping. But I cant blame that all on vevor, the shipping company definitely didnt treat the package nicely. Overall the rack is great quality and I would buy again.

Great quality, heavy duty I love the castor on the bottom that makes it mobile. The only downside is that assembly is laborious with lots of pieces and screws.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.

I was struggling to find something that wasn't $300+ to house all my new networking equipment. This looked perfect for what I wanted to do. Only 4 stars simply due to the screws and hardware not fitting perfectly and some of the assembly needed a little more elbow grease than anticipated, but for the price cannot complain at all. Put this together and had everything mounted properly in an evening. Definitely recommend if you are looking for an inexpensive setup for your precious equipment.

Was straightforward to assemble, just make sure you have appropriate tools, power tools preferred. Quality is good for the price, not the best but you get what you pay for. Holds all my equipment pretty well, except there is a little flex with my ups. My ups is a three battery 1500 ups so its a little heavier than most. But I put it on the very bottom so its not noticeable. Overall I would buy this again and if its all you need for your homelab or server it works really well. I would recommend it to anyone that only needs a 9u rack.