Kundeanmeldelser for VEVOR 20U åpen ramme serverrack, 58,5–101,6 cm/223–40 tommer justerbar dybde, frittstående eller veggmontert nettverksserverrack, AV-rack med 4 stolper og hjul, rommer alt nettverksutstyret ditt, IT-AV-utstyr, ruter, modem

Very heavy duty and good quality unit. A little involved to assemble, but it is worth the time and effort. I bought the 15 unit rack after buying this 12 unit one.

Excellente qualité Montage très facile, les indications sont correctes Aucun jeu Tournevis électrique indispensable

500% better then any other found unit. Very strong, both sides usable, neatly marked parts for assembly. OUTSTANDING… Tom

I use this Rack for my home lab/media server. In this rack I have a 4U server case with 15 3.5" HDD, 1U surge protector, a Blonder Tongue Audio/Video modulator, network switch, and KVM. It is sturdy, and rolls well even over carpet. Nobody else is offering something as nice at this price point. Vevor is my go to place to buy White label products.

Dollar for dollar, you won' find a better deal on a rack that adjusts to long (real!) servers! I keep buying Vevor...the more I browse, the more I buy lol

Overall, the rack is great and give it 5 stars for the price. The installation, however, is 2 stars. You first have to use the PDF version of the manual to even figure out what the steps are because the printed manual is of very low quality. While you will eventually figure it out, it is not evident right away and takes some time to determine the proper orientation. There's definitely no way you can use a hand driver to tighten the screws since it is not predrilled/threaded. You may not need an impact wrench depending depending on what type of electric drill you have. The screw heads are like butter and get stripped pretty easy so be careful.

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.

Rack arrived quite fast and packaging was in good condition. Only problem was that assembly instructions were missing. Anyway, rack is quite easy to assemble, so instructions are not necessary. Also those can be downloaded from product page. About rack itself. Paint job is not best. There is scratched and other flaws in paint. Also paint is quite thin, so it scratches quite easily. Also, top cover does not cover whole rack when depth is increased. Top panel cover whole top only when rack is not expanded at all. Most problematic is that rack is little flimsy. Product page says that you can load up to 500lbs (226kg) of stuff to the rack.I have loaded some 120 kilograms of equipment to the rack, and wheel mountings are starting to bend. Also when moving rack around, it feels like it is going to collapse. I do not have needs to move it around. It might be that i remove wheels and keep it stationary. Conclusion is that rack is quite nice for it's price.

Look at the metric sizes as the rack cannot get as shallow as 15", it is a little over 23". Good, solid, small server rack, but does not fit in the location I intended to put it in.