Kundeanmeldelser for VEVOR dypbrønnspumpe, 750 W 230 V/50 Hz, 105 l/min 62 m trykk, sandbestandig <5 %, 20 m elektrisk ledning, 8,9 cm vannpumper i rustfritt stål for industri, vanning og hjemmebruk, IP68 vanntett

Llego segun el tiempo estipulado en la web , la colocacion fue rapida , funciono perfectamente y con uma presion adicuada.La recomiento

Cette pompe est immergée dans un puit à 8,5 M, puis remplis un ballon d'expansion à 4 bars. Fonctionne très bien pour le moment.

Montata in un pozzo profondo 20mt la pressione di mandata è molto forte, completa di cavo elettrico e cordino, peccato che non ha un galleggiante per lo spegnimento automatico quando il livello dell'acqua è basso, nel complesso ottimo rapporto qualità/prezzo.

Por el momento muy contento, cumple muy bien su función, da mucha presión, ya solo falta saber si es duradera...

Es impresionante la potencia de extracción de agua en un pozo de más de 20 metros de profundidad. La instalación es muy sencilla y la desconexión automática incluida en la bomba es muy práctica y facilita mucho dicha instalación. La verdad es que al recibir el producto no daba crédito a que me hubiera costado el precio que pagué.

Works great! Took the motor off and it hooked directly up to my fountain. Pond never looked better!

Bought this pump to use the motor on a pond fountain. It hooked up perfectly to the spray nozzle. Works well! I’ll be buying another one for the second fountain…😊

Compré este conjunto de bomba y aparato de presión. El aparato de presión no lo he instalado. La duda es, solo con la bomba la puedo dejar encendida y se conectará tan sol cuando abra el grifo o sin el aparato de presión no se para sola cuando no haya grifo abierto?. Gracias

This review is for the 1HP, 750W, 115V VEVOR deep well submersible pump. I use the pump vertically in a 30 foot, hand dug well so relatively shallow. The line was kept at 1 ¼” with Vinylite G911 tubing and stainless fittings. After about running the pump for maybe 20 hours over this past summer, I am very happy with the performance and output. Since I am in an off-grid situation, I rely on a solar-battery system with a back-up generator. During start-up, my 2,000 watt invertor (4,000 W peak) wasn’t able to run the start-up phase but another 3500W inverter worked well. Off grid users should be aware of this limitation when deciding on a pump motor size for their system. My Honda 2200W inverter/generator was also able to run the pump but I doubt it would power a 1.5 HP unit, again, because of the start-up requirement. The attached photos show the install, examples of output with a 2” fire nozzle and large sprinkler, and pressure measurements with both full open and full closed line, the latter measured at about 75psi. The full-flow, open output pressure of about 25 PSI may limit the operation of some sprinkler devices but with my large nozzle, I could send a water stream about 60 feet – very useful for fire control. I estimate that the pump could produce about 5,000 litres per hour at full flow from a water depth of 25 feet. Another important feature that the user will have to consider is that the pump has no automatic pressure cut-off switch. If the user is only using it in just an on-off scenario this doesn’t matter but the pump is not designed to operate without flow due to overheating issues. Next summer, I’ll experiment with a pressure cut-off switch or pressure tank. I would recommend this pump for quality, performance and especially value.

Sono soddisfatto la stò usando funziona benissimo facile da istallare comandi e schema facili buon prezzo ottima qualità la consiglio