Kundeanmeldelser for VEVOR 3,69 gal/14 l fruktvinpresse, kurv i rustfritt stål med tverrbjelke og trekantet struktur, manuell juicemaskin, presse for fremstilling av sider, eple, druetinktur med T-håndtak for kjøkkenet/hjemmet

Worked OK on cherries. After grinding apples, it juiced em perfectly.

Fairly simple to put together and use. Did strip the paint off metal plate when used. Slightly disappointing juice yield, only about 25-30% from my apple pomace, but wouldn’t have got any without the press I suppose. Equated to about 2L juice from full basket of pomace (12L basket press)

Super!

The use is amazingly simple. The juice produced is great. When actively pressing, the mechanism’s threads flakes and grinds under the resistance of the fruit. And, does not squeeze all of the fruit because of the strainer bags. Very good product for small amounts of juice; bad if you just harvested a bunch of fruit to squeeze.

Works great , just what I needed

Recibi un paquete diferente pero la solicitud ha sido atendida correctamente a tiempo.

I used this VEVOR fruit wine press to separate an alcoholic beverage from the fruit pulp, and it worked quite well for that purpose. The press is simple to use and the manual T-handle provides enough leverage to apply steady pressure when extracting the liquid. The stainless steel barrels feel durable and are easy to clean after use. For small batches, the 1.65 L capacity is practical and suitable for home use. It’s also fairly compact, which makes it easy to store when not in use. Overall, it’s a straightforward and effective tool for pressing fruit mixtures and separating liquid from pulp.

I bought this press to remove all the wort from my mash while distilling. I place the brewers bag with the grain from the finished mash in the press and it does an excellent job of removing about another gallon of wort from the grain. Its easy to use, simple and easy to clean. Only one issue that I need to solve that is caused by design of the unit. The pressure plate to jack screw shaft needs a bearing at that connection. When the pressure plate is compressing the product it is not turning but the jack screw is. It is a metal to metal connection and the result is the two parts are wearing on each other and make metal partials that get into the liquid from the pressing. I also see it will eventually wear thru the plate. Since I am distilling the liquid its not an issue. If you were drinking the liquid direct like juice it would be a problem. If it wasn't for this one issue I would give it 5 stars on quality.

Die Presse ist stabil und relativ gut verarbeitet. Die Saftausbeute im Vergleich zu meinem elektrischen Entsafter ist sehr gut und der Saft ist klar. Bei der zweiten Benutzung habe ich eine große Menge Orangensaft hergestellt. Da sind mir beim umfüllen des Saftes feine, dunkle Partikel aufgefallen, die auf keinen Fall aus den Orangen stammen könnten. Ich vermute, dass es sich um Abrieb von der Gewindestange handelt, was ich nicht besonders gut finde. Der Preis der Presse erscheint mir nachträglich etwas zu hoch, aber ich werde weiter versuchen, sauberen Saft damit herzustellen.

Le bois du pressoir est suprème, la construction est très solide. il manque l'avis de le traiter le bois avec de l'huile tournesol chauffée à max. 65 C. Les vis pour le montage des pieds sont insuffisants. Il doit être pris en compte, que ce type de pressoir ne convient pas pour faire de jus de pomme!