Kundeanmeldelser for VEVOR 37,77cc bensindrevet T-stolpedriver, 4-taktsmotor bensindrevet gjerdepælemaskin, med 2-stolpe drivhode (55/70 mm), 1000W bærbar pæledriver for gårdsbruk, ranchgjerder, veiforbedringer

I found that it doesn’t have a lot of impact it’s more of a tap so I had to use my old school manual pounder and use this when I needed a break. Great tool but needs more stroke for impact.

Awesome engine on this little machine, the anvil on it needs some work tho might cracked it like 6 post into the job

It worked great on the test posts we did but after winter and we pulled it back out of the box and put gas in it, it wouldn't start. Figured out the carborator wasn't letting gas into the engine. Purchased a carb and waiting on it to show up

Couldn’t drive a 3 5/16 post more than 2” into soft ground. Very disappointed

I bought this as a back up to my titan PGD 3825, which is getting old, for drill pipe. This product is not strong enough, and the machine smocks sometimes. I created a ticket on 04/18, and I am getting the run around to return this machine. All I need to do is return this and get a machine that works. If they have a better one this works, I can exchange . After sending 3 emails fasting for a return label, this morning I got an email with a video on hoe to warm up the engine. How does that help in this situation

Product looks nice. But ends there. Poorly made Product. Part identified as hammer seems to be too small for the cylinder. You have to check for proper alignment of the hammer before each post. If you don't and part is sideways, it would bust the housing. Don't expect to be able to return for a full refund, I was offered a 40 dollar refund and keep a product that is no use to me as it is. I bought it to speed up a process but complications from quality in design prevents that. Holediggers will work better and allow me to do the quality of work I expect to provide for my customers.

Didn't fit on a wooden 4x4 as advertised

Frustrated 😫 with this machine's lack of power, and the vibration keeps loosening most of the cap screws. The hammer mechanism bolts all came loose without much stress on the machine. I was driving a wood post for a fence, and it has been frustrating having to stop frequently to tighten bolts and screws so they don't go flying all over the place.

I have bought a lot of equipment from Vevor, but sadly I have to say I was disappointed with post driver. I have used several over the years, but there was one significant issue that I couldn’t get over. The collar that the driver sat on just isn’t long enough. I was trying to drive 6.5’ t-posts and the head of each post bottomed out about a 1/2” in which causes the heavy machine to be very unstable making it difficult to drive the t-posts in straight or even support it. It was literally more exhausting trying to support it than just using a manual post driver. The quality was decent and maybe a round 4x4 post might be better since it has a large flat head to rest on. It comes with different size collars to support different types of posts, so I am going to try using a larger collar with a piece of steel tube the t-post can sit in to give it more stability.

Enfonce pieux pas top, à la première utilisation 2 piquets bois de clôture de diamètre 8 enfoncer et la dame du pilon ce brise en deux. Qualité et fixation de la dame très très légère acier zéro et pas de pièces détachées ( introuvable). Je pense que dans le sable ou terrain meuble ça peut peut-être le faire ??? Fragile je ne peu pas recommander ce produit