Kundeanmeldelser for VEVOR oppbevaringsstativ for 3D-skriverfilament, 5-etasjes kraftige oppbevaringshyller for 3D-skriverfilamenter, filamentspoleholdere for 3D-skriverstudio, hjemmestudio, kontor, verksted (kun hylle)
Kunde anmeldelser
Hvordan kundeanmeldelser og -vurderinger fungerer
Kundeanmeldelser, inkludert produktstjernevurderinger, hjelper kunder med å lære mer om produktet og avgjøre om det er det rette produktet for dem.
Den samlede vurderingen vår er ikke et enkelt gjennomsnitt. Vi prioriterer autentiske og troverdige anmeldelser og filtrerer ut duplikater eller ugyldig innhold før vi beregner den endelige poengsummen. Dette bidrar til å sikre at vurderingen virkelig gjenspeiler reelle kundeopplevelser.
Anmeld dette produktet
Del tankene dine med andre kunder
Skriv en anmeldelse
112 Anmeldelser
Anmeldelser for Gjeldende Produkt
Verifisert kjøp
Bilder og video kun
Oversett alle anmeldelser til Norsk (Berkmel)
Robban bruker
Fungerer helt topp
0 personer syntes dette var nyttig
garett mediocre if expecting something
good for like a closet underwhelming for a large room. a normal desk with ams is the only way to go if you are printing
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Mikael Hellgren Dålig
Dålig ena popnuten va lös så går inte montera ihop
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
AL*** 420 piccolo
No va bene, troppo piccolo
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
ANIK'S OASIS LLC Incorrect Listing Picture
use caution item is not what is pictured. although i sent them pictures and they refunded me. Vevor still has not updated the picture. There is no top spool rod and its very flimsy shakes like crazy...also has two bars to install which would make it more stable but cant install them because the Bambu P2S wont fit if the bars are both installed so I installed only one which pushes against the power cord but yeahhhh...you pay for what you get...but again do not go by the picture...its incorrect...
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
rc*** Misleading
Your picture is deceiving because my didn't come with the top part of the cart as shown in the picture!
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Teresa Faulty
It arrived the holes dont aligh and the feet can't be attached making it unstable and dangerous and customer service haven't responded after 2 business days when saying ut was marked as urgent. Dangerous product that will tip due to being faulty
1 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Roger Midkiff Owner
Working good
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Patrick Marginal
The 3d.printer stand is marginal for actually using a 3d printer on it. It wobbles side to side entirely too much. Needs additional bracing or larger tubing to really make it solid.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
RA Customer Service is just a bot
Requested the missing parts from the previously returned rack. It is missing leveling feet and washers package. Otherwise, can be used.
I placed Bambu filaments with spools in three tiers. The boxes interfere with each other. There is not enough space to place them on each row without the one below is pushing the upper one or vice versa. As is now with only three rows, it is difficult to pull one out from the lower row. I wonder what happens if all row as are loaded. It needs to have about an each more vertical space in between the rows. I would return it but considering the "support" I got is "they conducting a detailed technical investigation" before they can send a missing leveling feet, I am not going to waste my time. Do NOT buy.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
