Kundeanmeldelser for VEVOR 52cc bensindrevet T-stolpedriver, 2-taktsmotor bensindrevet gjerdepælemaskin, 1400W bærbar pæledriver med 3-stolpe drivhode (49/69/100 mm), for gårdsgjerder, ranchgjerder, veiforbedringer

Après 4 pieux en bois de 2,5m enfoncés sur 1 m de profondeur (diamètre 80mm et 150x150 avec un outillage spécifique) dans un sol relativement meuble : - Des serrages de vis à vérifier mais ce n'est pas anormal. - Démarrages moteurs très faciles (à froid comme à chaud) - Ensemble lourd mais a été un avantage dans mon cas , pas de problème pour manipuler l'appareil seul. Après plus de pieux, la fatigue doit se faire sentir mais rien de comparable avec un enfoncement des pieux à la masse!! - bruyant : casque obligatoire - Moteur puissant

This worked great, it took us little while to figure out the different buttons to make it work, but overall once you get it going, it works well. Volunteers were able to use this to help us put in several t posts.

WORKED GREAT WAY EASIER THAT POUNDING POST BY HAND

Worked great! Used in hard red clay and worked perfect

I bought the machine mid July 2026. It's heavy and rudimentary. Because of the weight, it is difficult to position the unit on top of a 9ft pole to sink it 3ft into the soil. STOP Button is too easy to touch while operating the unit, switching it off unintentionally. It is also not well designed. Will only start and run on full choke; reducing the choke after a 5min warm-up will kill the engine. “Easy Start” did not seem to function on the unit I purchased. Starting the driver needed to happen on the ground, as it is awkward to hold to re-start while on a ladder or elevated platform. HOWEVER, I succeeded in sinking twelve 9ft fence poles (MASTER HALCO from Rona) over three days in Mississauga clay. Mind you, I probed the ground with a 4ft threaded rod chucked into a drill. The post driver will not overcome stones, bricks, and tree roots when pounding in clay; in sandy soil it could be different, but that I do not know. It would appear that a motorized post driver is not available for rent in the GTA and further north to Georgian Bay. I checked the usual tool rental companies (Coopers, etc), only Home Depot in Etobicoke had one for rent when I inquired, but it became unavailable when I wanted it because it was broken; HD was not going to get another one, or so the story goes. US branded post drivers are well in excess of $1,000. Options for sinking piles in heavy clay soil are limited, particularly for fence replacement if one wants to do it as a DIY project. A 50ft six feet high fence, 150 boards, 3 rails, cap, and held up by 12 posts, including all SS screws and the VEVOR Post Driver, has a price tag of about $2,300.00. And I keep the machine for future projects or sell it and recoup some of my outlay. Was it worth it for me to purchase the VEVOR Post Driver, or would I rather be on a 10-foot ladder and hammer away at 9ft steel posts? While not perfect, the unit fits the bill in more ways than one, and I am glad I was able to buy it.

Have not used it yet. Put gas and oil in and ran it.

I’m totally satisfied with my purchase.🤙🏻

Produit conforme merci

Excellent Quality!

We bought this t o put in wooden posts and to drill holes g o help plant fruit trees. It has worked well