Kundeanmeldelser for VEVOR båndslipemaskin, 30 x 1-tommers båndpoleringsmaskin med variabel hastighet og VFD, 550W poleringsslipemaskin med 2 slipeformer og 3 stk. slipebånd for metallbearbeiding og knivproduksjon

This machine was a pleasant surprise. A lot of good stuff is included in the package! I had to do some modifications to it for my own personal use though. I had to cut the platen arm down by 1.5" to be able to properly use it. The platen requires some adjustment --it's not just plug & play, and the platen surface itself is poor, but an easy fix: wear out the one it comes with, then get a ceramic platen online for about 15 bucks and stick it on there (remove all remnants of the original first). A couple words of caution to the user: 1) the tracking on this machine is sensitive, so go slow until you get a good feel for it; and 2) the wire connections on the VFD are a little sketchy. The wires on mine fell out as I was mounting the box on the wall. Easy fix, but not one a user should have to make. Over all, I am pleased with it.

What i like is variable speed control for higher grit belts and runs on 120v. Heavy duty construction.

I use this to re-establish damaged blade edges. Super nice machine. The variable speed control is a must for what I do. It is a small but mighty machine! Highly recommend for anyone. Would be interested in 2x72 machine.

Very easy to use and very well built.

I use it strictly for sharpening knives with a 800-1000 grit belt. Works great.

Bin sehr zufrieden von der Leistung und auch die verarbeitung ist super. Standart 200mm Bänder passen auch rein da man ja den Arm an der Maschine auch nochmal verstellen kann . In großen und ganzem mega Teil würde ich wieder kaufen.👍

Tolles Produkt Gute Qualität zu einem guten Preis Sehr schön verarbeitet Produkt war sehr gut verpackt Bin sehr zufrieden

Very valuable.

For the cost, you can't beat this machine. You may need to make some tweaks to improve its performance but it has plenty of power for the intended use.

I bought this grinder to replace my Rikon 1 x 30 belt grinder that was several years old. The price was about 10% more than the Rikon but the grinders are night and day apart. There are very few cons in my list and so I ditched the Rikon grinder without a second glance. There is simply no comparison between the two. The Rikon design is very common in grinders of this size. This Vevor grinder's design is much more like larger, 2 x 72 grinders. This is a huge advantage. Pros: - Variable speed and reversing using a VFD, giving precise control over belt speeds and direction. Very nice. - Belt changes are quick and simple, with an easily accessible handle to release belt tension. - Belt tracking is quick and simple to adjust, and once set does not vary. - Multiple grinding accessories are included, both a 4" hard rubber wheel and a sturdy flat steel platen with rollers at each end, which provides rock solid support across the entire belt width. - The entire assembly pivots 90 degrees, with a different support plate ideal for this position. - Quiet operation and smooth running, with a powerful motor. Cons: - Getting the support plate square to the belt is fussy, with too much reliance on hex wrench (included) - Tilting the assembly also requires some hex wrenching.