Kundeanmeldelser for VEVOR 6-kjevs dreiebenkchuck, 6 tommer (160 mm), selvsentrerende chuck med D1-4 kamlås-bakplate, 0,12–5,71 tommer (3–145 mm) spennområde med T-nøkkelskruer, HT300-materiale, for tre- og metalldreiebenk

Muss nachgearbeitet werden, aber sehr guter Rundlauf

goede service en perfecte klauwplaat enkel uitkuisen voor gebruik(hier en daar fabricatie metaal schilfers) voor de rest zeker aan te raden

Tiene muy buena pinta y lo recibí muy rápido

I had the good timing to order this "little monster" to a really nice price. I got it some days ago and the work to turn an unused flange fitting to my Blomqvist lathe was fairly quick done. The specs for runout for a 6" is 0.08 mm and I measured 0.04 mm total runout with a 12 mm centerless ground steel shaft. I bought this chuck mainly for holding thinwalled rings and very short tubes. The entire chuck was disassembled and washed clean, sharp edges were softened. Prior to reassembly way oil was used onto all surfaces. I am impressed by the very good runout achieved and this is really high value for spent money.

6 Jaw chuck did fit my lathe with camlock D1-4. It came so dirty and didn't like to move smooth. Had to take it apart, clean every part. Debur it, rework it. Grease and oil. Cut down the plastic back plate because it was touching the gears. Took me 2 hours. Now it is a good chuck with 0.05mm runout

very good

A great addition to my lathe. 5 star product

ΠΟΛΥ ΚΑΛΟ ΚΑΙ Η ΤΙΜΗ ΤΟΥ ΕΙΝΑΙ ΤΕΛΕΙΑ .Η ΑΓΟΡΑ ΤΟΥ ΗΤΑΝ ΓΙΑ ΜΕΝΑ ΚΑΘΟΡΙΣΤΙΚΗ ΔΙΟΤΙ ΕΙΜΑΙ ΑΡΧΑΡΙΟΣ ΚΑΙ ΕΤΣΙ ΔΕΝ ΧΡΕΙΑΖΕΤΑΙ ΣΥΝΕΧΕΙΑ ΝΑ ΑΣΧΟΛΟΥΜΑΙ ΜΕ ΤΗΝ ΕΥΘΥΓΡΑΜΜΙΣΗ ΤΟΥ ΕΠΙΘΕΜΑΤΟΣ(ΤΕΜΑΧΙΟΥ).

muy bueno para sujetar cilindros

The chuck is at a excellent price point but the quality lets it down some what it had to be completely disassembled and de-burred and washed out to remove grinding particles. Once that was done and reassembled correctly all is good and I look forward to many years of use.