Kundeanmeldelser for VEVOR luftkompressorledningssett, 61 m x 1,5 mm, HDPE-aluminium trykkluftrørsystem, lekkasjesikkert og enkelt å installere, trykkluftledningssett for garasjer og verksteder, svart

the kit its-selve is OK. BUT no chance to order some more of the pieces. No spare parts list. Waisted hours to order more parts through other suppliers. Can therefor not recommend this kit

The pipe is good but the connectors are bad they leak no matter what you do

shiet fails all the time.

Bought this and its missing all my fittings, cutter and everything but the pipe. Customer service is horrible. Wont send fittings and cant get a refund. Dont reccomend

The kit comes with nothing to adapt your compressor. You will have to buy several fittings. better off to buy PVC and adapt it.....not worth the Hassel.

Would be nice if you would sell the fittings separately so a person could buy extra fittings.

Difficult to work with, very hard to get straight. Kid is not very well thought out you were more than likely need to purchase additional elbows in order to use this kit. If you don’t mind it not being straight it’s a good kid. If you are running more than 5 foot section at a time definitely recommend having a second person to help install it. Once put together sealed very well, but not very aesthetically pleasing because it’s so difficult to get straight.

Quality of item is good and everything included in the box to install as advertised. Pipe was a little stiff to work with but perhaps the cold environment during installation did not help. 2nd time i have used Vevor and both cases i have been happy with the product , the only negative i have to say is that items are advertised VAT included but this is not so, on both occasions i have had to pay the VAT when collected from the post office and this will limit me from using Vevor in the future.

The whole kit is pretty well made and easy to install. It could be supplied with a few more fittings or a choice to get more for peace of mind. My only concern is the aluminum block that they supply with the kit is useless. All of the 4 port are made using straight (parrallel) thread and all the fitting are NPT, but the thread is so loose every fitting thread will bottom without even starting to get tight. This would require a huge amount of teflon tape and would still be very leak prone, but the other problem is the kit doesn't supply enough plug or fitting to block all the unused port so you couldn't even use all the supplied block even if you wanted/needed. I ended up making my own aluminum block with just 1x in and 1x out, with proper NPT thread. Looks badass.

Not good quality waste of money