Kundeanmeldelser for VEVOR 700 bar lufthydraulisk pumpe, 1,6 l hydraulisk pumpe, 0,8 l/min (uten last), 0,16 l/min (last), hydraulisk fotpumpe med 2 m slange, luftfotpumpe, bilreparasjon, oljerigging, maskinvedlikehold

Trae todo para conectar con una punzonadora CH-70, lo probé con una placa de 3/16" en barreno de 1/2" y trabajo sin problema. No es muy rapido al bajar pero si tiene velocidad acceptable de aproximación y al llegar a donde hace el corte quizas tardo como 2 a 3 segundo adicionales. Unos 10 segundos en total. Quedé en los acabados del pedal y en su desempeño. Muy fàcil de implementar y usar.

Worked great everything was there that you need to use it , I’m very pleased

Works as it shuld

Super

works great

Trae todo lo que dice y cumple espectativas. Servicio de entrega rápida. Calidad precio recomendado, no engaña. Probada en prensa

Ottimo

Works really well, I was very surprised when it came full of fluid already. Worth every penny

This unit is much quieter than my previous unit and works very well. This replaced a previous unit of different design that had leak issues. The design of this unit will prevent leaks. I would definitely buy another one for other hydraulic equipment that needs a single acting power supply.

I've replaced the hand pump on a Trade Tools 20 ton press with this pump. My shop air pressure is on the lower side of the pumps rated air pressure. I'm getting to about 19 tons according to the gauge on the press which is apparently 9,558 psi of hydraulic pressure. The hydraulic fitting are 1/4NPT so some adapters are needed to bring the 2 together. I also picked up a quick connect from Ali Express with 3)8 NPT threads. Looking like it will make my press a lot easier to use.