Kundeanmeldelser for VEVOR Airless veggmalingssprøytepistol med høytrykksrør, sprøytemaskin høytrykkssprøyting, 2000W veggmalingssprøytepistol malingssprøyte for vannbasert og oljebasert innendørs og utendørs

I am so glad i bought this unit instead of renting one to save a few bucks. This sprayer performed Flawlessly all day! I sprayed my whole exterior in under 5 hours and cant wait to use it for my cabinets next. If you are looking for high quality for half the price this is it!

Works great! Purchased this to paint the inside and outside of two 40' high cube shipping containers. Makes short work of it.

I previously had a graco x7. Rated for "120 gallons a year" After about 120 gallons through it over several projects the pump became too weak for thick paint. So, time to buy another. Was going to buy the graco pro series rated for 400 gallons a year but then found this one. After "hunming and hawwing" for a day, not sure to trust the vevor product I went for it as it was about 1/4 the price of the graco. I can return it if it's bad, I thought. Happy to say I did 20 gallons in about 3 hours, and it works like a champ. Very happy, definitely recommend! It is a little funky to get primed (they all are) Put in water first, get a good prime and then switch to the thick paint as fast as you can as not to loose the product in the hose. Takes maybe a minute or two to prime. Do not despair when it does not prime in the first 10 seconds. Keep playing with the gun trigger and primer switch. If this machine gets anywhere near 400 gallons of use, it's a fantastic product for a very good price.

Just what I needed for the job I was painting, couldn’t be more satisfied, saved a lot of time and less messy.

Have used it twice so far. Have pumped around 20 gallons of paint so far and have had no issues. Fast delivery and easy to assemble. Would recommend this product.

Arrived as expected. Works well. It is more suited to five gallon pails of paint that single gallon paint cans. The nozzle isn't perfect--some fingering and maybe more over-spray than ideal-- but that could be part of my learning curve. The unit will effortlessly cover a lot of surface very quickly. Latex primer went through the suction screen without problem but I needed to thin the latex paint that I was using. The nozzle did not plug so I never needed to try the reverse clearing feature. The gun disassembles easily for cleaning. I would hesitate to use it for oil-based paint because cleaning the whole sprayer would require a lot of mineral spirits--maybe for a bigger project it could be worth the investment.

Llega en perfecto estado muy bien empaquetado la verdad me gustó mucho ..................................

Used this to spray primer on an entire room, 3 ceilings and then with a 311 nozzle, sprayed semi-gloss white trim. Did everything great. I had some drips due to inexperience, but wow, so much faster. Yes- Overspray is a thing to manage…use a fan to blow out of the room.