Kundeanmeldelser for VEVOR ballastboks, 3-punkts kategori 1 traktorballast med 363 kg kapasitet, med standard 55 mm tilhengerfeste, kraftig stål 0,09 m³ stort volum slitesterkt lasterfeste med skyvedør, svart

Overall quality seems good, can’t beat the price. The top hitch pin was slightly too thick for cat 1. I had to grind it down to make it fit, but eventually just picked up a new pin. The green one isn’t quite John Deere green, but close enough.

Not truly quick hitch ready out of the box. The lower two lift pins are about 1.5 i chest to narrow for U.S. quick hitches. Easily fixed with some grade 8 bolts, washers and nuts. Overall after adding the grade 8 bolts to create extensions for lift pins I am extremely happy with this product.

Had low expectations but was pleasantly surprised. Seems there are different versions out there so was happy this one looked like the pics with reinforced gussets where the 3pt pins attached. Not w/o issues though: the pin for the top link was too thick to fit thru my link (is it really Cat 1?) -had to improvise; as others have noted the 2" receiver isn't really 2" so some slop with the hitch - I haven't tried to pull anything with it yet, will probably be OK for what I do but not sure I would try towing a 3000LB trailer. Love the tubes to fits garden tools. was thinking of adding a partition to put tools that have a handle instead of just a pole but those are usually shorter tools and I just lay them across the top and secure with cord when I need them. While the green isn't exactly the right color the finish is perfect and I had to look really hard to see where the seems where welded. A really nice suggested feature would be a reflective slow moving vehicle triangle sticker. For the money and my light duty leisure work it is a great so far.

I was looking for something to weight down the back of tractor a little better than the box scraper or mower. Using sand in this ballast box really did make a difference. The unit came quickly and there really is not much to do in the setup. Real easy to put together. My only concern at the welds on some parts of the ballast. Only time will tell but for now it seems like a solid buy.

Overall it is a good item. Quality metal was used with decent welds. The quick hitch points could be of better quality. But overall I would purchase again if needed.

The Vevor ballast box works great, but its not quick hitch compatible unless you have a quick hitch with the adjustable top link hook. I purchased one from Vevor as well....the ballast box is built good enough for what its designed for....one of the lower 3 point pin arms was slightly bent when I received it, and it seems this is quite common....a few nudges with the sledge hammer and got it bent back into the proper position. If you buy one of these ballast boxes, buy the quick hitch that Vevor offers as well...it'll save you time and a lot of headache, plus you won't hate yourself when you try to remove it after you've filled the hopper with sand, gravel, or whatever. The 2 cylinders in the one side work great for holding a shovel, or rake. This box will definitely be useful when moving heavier items around with my pallet forks, and even doing loader work. The ballast box doesn't stick out as far as most tractor implements, so it'll allow you a bit better maneuverability in tight spaces. Its somewhat easy to use, if you have the quick hitch...if not, be prepared for a struggle, or pull the access door on the front of it to dump out whatever you used for ballast in order to remove the box from the 3 point.

I have no odeau how you can fit 800 pounds in it. Otherwise it is what is, a box

Fitted to my 20Hp compact tractor with a front loader so needs the bit of weight on the back. Technically works pretty good but the pins delivered with the unit for the lower link arms are a disaster . Absolutely stupid things, only about 15mm in Dia with bushings to take it to CAT1, 19mm. The bushings are too short so they slide out of the lift arm eye, and they absolutely look terrible. Had to go buy some proper CAT1 short pins.

Well, you get what you pay for. The finish is nowhere near how smooth and nice the pictures look. Not sure why they dont use standard pins. I have not installed yet as i may return it. Good luck putting loose sand in it as you will leave a trail where-ever you go. There is about an 1/8 gap at the bottom of the door panel so your sand will not stay in the box. Overall finish is marginal at best. Mine looks like the whole top rim was full of rust when they painted over it, so all bubbly under the paint. I expect it to start chipping and looking even worse in the first week of use. I would not recommend unless you dont care how it looks. Putting it on a new tractor seems it will devalue my tractor. I have purchased things from Vevor before that were good quality. This is just not even close.

Overall, this ballast box meets the primary objective which was to add weight on the rear of my tractor. It arrived in 4 days with a couple minor shipping scratches. The lift arm pins were too long and Vevor's response was that there were no shorter pins in stock. So, I went ahead and purchased the correct size Cat 0 pins with Cat 1 to Cat 0 reducing bushings. This cost me an extra $36 for the parts plus gas (76 mile round trip) to go get the parts.