Kundeanmeldelser for VEVOR ballastboks, 3-punkts kategori 1 traktorballast med 363 kg kapasitet, med standard 55 mm tilhengerfeste, kraftig stål 0,09 m³ stort volum slitesterkt lasterfeste med skyvedør, svart

Definitely not the size as advertised. It is good for a lawn tractor at best. Says it will hold 800lb of ballast but it will hold 2 5 gallon buckets of stone

Box is good overall for the price , the only problem is the hitch receiver bent downward moving my empty dump trailer around my driveway.

Ordered this item and it arrived in a prompt manner and in good condition. Appears to be fairly well made with decent welds and gussets. However, it was advertised as a CAT 1. The unit that I received appears to be CAT 0. It is not compatible with my Kubota b2100 or my rk25 or my rk37 all of which are CAT 1.

The ballast box is exactly as expected for the money. It was packaged good and received on time. The main problem is the size of the lift pins! The pins are for a Cat 0. They send a bushing for the upper pin that measures 1” which is for a Cat 2 upper pin? Other than the pin sizes the box seems to be of good quality for the price.

I’m not sure what you would need to put 800 pounds in of I filled with sand and water and it’s still basically 250 pounds need to build a larger unit. Even with density of concrete, I could still only get 310 pounds in.

Packaging is very thin with just cardboard walls and not properly protected, so box arrived slightly bent at some corners. Paint is peeling where bend occurred. Still usable, so I didn't bother with complaining/replacement. But you get what you pay for, quality not matched with famous tractors vendors.

Was advertised as category 1 but lift pins are really category 0 with some bushings. This will make it impossible for me to make this work with my category 3 quick hitch. I wish the lift pins were actually category 1, or at least they could be longer.

The bottom pins for this do not fit a Cat 1 3pt hitch as advertised. The box rattles around in 3 pt hitch holes. The pins are 18 mm diameter when 7/8” (or 22..225mm) is needed and I have not yet found a bushing that will convert the pin to 7/8” that I’m happy with.

Where do I start – Pins are NOT CAT 1 size as mentioned in other reviews. But on top of that....The Overall build quality and Steel is very light for the intended purpose. It’s a a weight box so it should hold weight, right? I have it filled with FIVE 55lb sand bags and it distorted the box itself and one lower 3pt pin has bent. The Hitch receiver is very light duty and too large to hold a standard 2” square receiver. This product is a perfect example off shore production without quality control...the size of the weight box and implement holders are great, as is the price point, but it is substandard. The implement holders also need drain holes in the bottom to drain rain water. I took it to a welding shop to have it beefed up and it cost $100, now it works well. I still have to find and upsize the 3-point hitch pins to 3/4.

Well construction could be better and this definitely will not weight 800 pounds after being loaded with anything. False advertisement . But for the money it does hold some weight and 2 handled tools