Kundeanmeldelser for VEVOR ballastboks, 3-punkts kategori 1 traktorballast med 363 kg kapasitet, med standard 55 mm tilhengerfeste, kraftig stål 0,09 m³ stort volum slitesterkt lasterfeste med skyvedør, svart

I bought it because of the price and features. I loaded it with 600 lbs of scrap metal and lead. It works as advertised. On the first use I damaged it when I drove the tractor forward after forgetting to raise it. It bent the legs on the bottom of the box. Bottom line the steel is just not thick enough to withstand hard use. I pounded it out. I will continue to use it while I look for a used heavy steel box.

Half the size it shows it's a photo shopped picture online

came with wrong sized pins that had to be swapped out via TSC.

tl;dr - Product not as described. Includes Cat 0 lift pins, not Cat 1. Geometry of 3-point connections is incompatible with Quick Hitch unless you have the means to permanently modify the parts. Top link pin not compatible with commonly available Cat 1-2 and Cat 2-3 bushings. I was excited to order this after what seemed like a fair number of positive reviews and some YouTube info. My goal was to fill this with scrap metal and concrete to have a more compact ballast box. I have a quick hitch with adjustable top hook. The box itself arrived safely and seemed reasonably sturdy. My satisfaction started to wane when I realized the lift arm pins included are category 0, not category 1 as advertised. Sure, there are bushings included, but Cat 0 pins are narrower and shorter than Cat 1 which makes installing QH bushings impossible without modification. After a bunch of back and forth with support, and promises to send adapters (with no indication that they understood what I was explaining), I took matters into my own hands. I split a piece of 3/4 tube stock, doubled it up, and welded that onto the pins. I then took that and fit it into the QH bushings and welded those together. Lift arm pins fixed. Next I got a set of Cat 2 and Cat 3 bushings for the top link only to find that they won’t go over the included top link pin. No problem - I have spares. With bushings installed, the hook on my QH does not properly fit the box. Either the lift pins don't sit in the hooks on the QH or the top link pin doesn't sit in the QH hook. To get all three to make contact with the QH, I had to remove all the top link bushings. My QH top link hook, even though it's adjustable, does not mate with this item the way other implements do. While I was able to make this work, it was a pain in the neck. If you have a quick hitch, DO NOT expect this to work without permanently modifying it. Also beware that the 3-point geometry is out of whack. If you’re using a standard top link and lift arms, you’ll be fine.

It has been over a month...still have not received this item.

Opened it up and looked great... then I started to unbox it and the paint literally fell off the top. Pins on bottom are very small and needed to be replaced as they do not fit a vevor quick hitch. Honestly one of the very few things I would never buy again from them. I would not recommend it.

I called vevor to verify this would fit a John Deere cat 1 hitch , and was told it would , and it's not even close. I would recommend something different.

Ballast box is advertised as category 1 but is actually category 0

FedEx never delivered to the right address, did not provide a picture of the package delivery . Probably delivered to another location. No solution yet

DO NOT BUY! This box is about 2/3rd the size they advertise. Holds just over 3 cubic feet of concrete. Contacted VEVOR and got no worthwhile response. Dimensions are not as advertised hence the weight is not what i require. Will add onto the box to allow for more weight. Should have just built my own instead of buying what i thought would be sufficient.