Kundeanmeldelser for VEVOR Båndsag 12,7 cm skjærekapasitet, 1100 W 10 A stålsagblad, jernsag med 127 mm maks skjærekapasitet (uten base), hastighetsskala for metallbåndsagmaskin på 137,8–472,4 fot per minutt

Wasn’t sure what to expect from this bandsaw but as it turns out it been very useful good accuracy with the cutting as long as you set it up right the first time no complaints after a while of using it

To have a bandsaw with a vise for under $200 you can’t go wrong. So far it’s been great hot rolled steel it does great. The only thing that I did not care for was the blade does not like high strength threaded rod not a big deal just burned up the blade

El repuesto de la sierra es difícil de conseguir

Received the saw, nearly perfect tool for the price range. Would recommend buying it as it does generally good job and saw blades are easy to purchase.

It’s a pretty handy little saw, not really little though and well worth the price compared to others. I’ve been having troubles with blades, finding them and getting them to cooperate but I’m figuring it out.

Arrived on time and was in good condition. I've used it a few times cutting 2 inch by 3/16 angle iron and on 1/2 bar stock it worked really well, and the cuts were really clean. For me it was a better option at the price point then a abrasive chop saw. It's much quieter, no sparks, and a cleaner Cut. My only problem is with the stand the adjustment handle for the angle adjustment gets in the way when clamping in a work piece, probably an easy fix just haven't tried to do anything with it yet. For the price it is a great tool.

Not bad. Adjusting miter is a pain. Good for home or small shop. Wish it would go vertical. Good price

Outil de bonne qualité, belle capacité et livré rapidement. Je suis très satisfait. Le seul point à améliorer est l’ajustement rapide et précis pour une coupe à 90 et 45 degrés.

I bought this going on the feedback and as stated the machine works well BUT the angle it cuts is off so I put 2 washers under the clamp bracket to lift the right side up which levelled the angle of cut. Also I welded 30mm to the blade guide plate so I could used it as a blade cut depth stop. The angle gauge is next to useless so just do a scrap cut and check it first but other than that would be a great machine if they would fix them problems.

Does the job I need it to do........... . ...... . ......... .................................