Kundeanmeldelser for VEVOR Skinnesett for skyvedør med sammenleggbar foldedør, 36" toppmontert skinnesett, glir jevnt og stille, kraftig, enkel å installere, egnet for to 16" skap-/spiskammerdører (ikke inkludert)

Produit très qualitatif pour le prix je suis satisfaite de mon achat

lo he recibido en perfectas condiciones, y aunque todavía no lo he montado, se ve un producto fuerte y de calidad

Works wonderfully. I bought all my barn door mechanism with Vevor and i don’t regret it. It’s been great. Good quality. Easy to install. I recommend

Good quality. Installation manual makes it easy to figure out the dimensions

Franchement je suis surpris par la qualité du matériel très bien et pose facile

Excellent quality. Easy to install. Not complicated. It’s not my first set. I love them. It’s so much better than the usual closet hardware. Usual closet mechanism suck and are always broken. This is bullet proof. Buy with confidence

Track was in 3 pieces. A little disappointed in that. Working well

parfait

Great product especially for the price. Shortcomings I found were: the rail needed included adhesive foam placed between the bracket and the rail in order to keep it from being loose; the stopper for the fixed roller is very difficult to tighten because it needs to be tightened from the backside. If the large set screw in the front and the short set screws that requires an Allen wrench to tighten were reversed the product would be close to perfect.

Will not purchase from Vevor again, Technical Support is useless and not helpful. Use dimensions in the install manual as reference only. Fixed roller was missing a long set screw in both 36 “ track kits, resulting in a trip to the hardware store to purchase a #10-32 1 inch bolt to secure the fixed roller to the rail. Did not use the design of the bottom pivot plate due to no adjustment with the door after securing to the floor, so instead used the jamb bracket and bottom pivot that was purchased with the bifold door, and the jamb bracket only required 1 screw to secure to the floor instead of 4 screws on the bottom pivot plate. The design of the track needs to be one piece, no matter how level and even the track connection strap, the adjustable roller still makes noise as it rolls over the connector straps. Quality Control and Design of the product at manufacturer needs improvement.