Kundeanmeldelser for VEVOR bærer- og pinjonglageravtrekker, kompatibel med Dana 30, 40, 60, 70, Ford 9"-lagre, pinjongavtrekkerverktøy med 2 clamshells, 45# stål clamshell-bærerlageravtrekker for bilreparasjon
Kunde anmeldelser
Hvordan kundeanmeldelser og -vurderinger fungerer
Kundeanmeldelser, inkludert produktstjernevurderinger, hjelper kunder med å lære mer om produktet og avgjøre om det er det rette produktet for dem.
Den samlede vurderingen vår er ikke et enkelt gjennomsnitt. Vi prioriterer autentiske og troverdige anmeldelser og filtrerer ut duplikater eller ugyldig innhold før vi beregner den endelige poengsummen. Dette bidrar til å sikre at vurderingen virkelig gjenspeiler reelle kundeopplevelser.
Anmeld dette produktet
Del tankene dine med andre kunder
Skriv en anmeldelse
23 Anmeldelser
Anmeldelser for Gjeldende Produkt
Verifisert kjøp
Bilder og video kun
Oversett alle anmeldelser til Norsk (Berkmel)
Dave This tool works tremendously!
I bought this because the name brand versions are astronomically priced for basically the same thing. That said, I was a little skeptical because of that reason. I've always heard "you get what you pay for". This bearing puller is very well made and heavy enough that pulling bearings off of the ring gear and pinion of an 8.8 Ford was a piece of cake. There was absolutely no cutting necessary and I was able to keep the pinion bearings to use for setup of the new one. This is an excellent and useful tool for a fraction of the cost. Highly recommended!
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Gouffon Sylvain Arrache roulement.
Surper outils.
Vraiment simple à utiliser, au top.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Silly Willy Worked great!
Worked so good we laughed. My buddy came over with the diff. We installed the tool, hit it with the impact, it was off in seconds. It was over so quick and was so anti climactic that we just broke out laughing. In a world where you usually need to tap things with a hammer and apply heat to get parts apart, this was a breath of fresh air.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Chris Excellent tool
Excellent product Worked great on my au fairmont irs m80 diff for the carrier bearings and pinion bearing
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Bingy Extracteur de roulement
RAS commande reçue dans les temps sans problèmes .Je recommande
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
DanDad The tool I never knew I needed!
Has pulled every carrier bearing I ever needed to pull. Borrowed to some friends they loved it too.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
James Whitla Decent tool for the price
Had to open up the yelllow clamshell to work on a Dodge 9.25” pinion, but it still worked.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Justin DIY
Works well. I removed the pinion bearing several times during setup of new gears on an old Chrysler 8 1/4". I did not need to remove the carrier bearings since it was all new, but it appears the tool will work.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
A E .
Gör jobbet enkelt och snabbt vid lager byte på tex piniong. Säkerställer avdragning av lager utan att riskerar lagret som fort annars kan bli kostbart.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Smitty Works well, quality tool
Bought for a 9” center section I am building for my 66 f100 build. Worked well and we have used on a few more carriers for wheeling rig builds. Recommend purchasing if your planning on doing differential builds.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
