Kundeanmeldelser for VEVOR bærer- og pinjonglageravtrekker, kompatibel med Dana 30, 40, 60, 70, Ford 9"-lagre, pinjongavtrekkerverktøy med 2 clamshells, 45# stål clamshell-bærerlageravtrekker for bilreparasjon
Kunde anmeldelser
Hvordan kundeanmeldelser og -vurderinger fungerer
Kundeanmeldelser, inkludert produktstjernevurderinger, hjelper kunder med å lære mer om produktet og avgjøre om det er det rette produktet for dem.
Den samlede vurderingen vår er ikke et enkelt gjennomsnitt. Vi prioriterer autentiske og troverdige anmeldelser og filtrerer ut duplikater eller ugyldig innhold før vi beregner den endelige poengsummen. Dette bidrar til å sikre at vurderingen virkelig gjenspeiler reelle kundeopplevelser.
Anmeld dette produktet
Del tankene dine med andre kunder
Skriv en anmeldelse
85 Anmeldelser
Anmeldelser for Gjeldende Produkt
Verifisert kjøp
Bilder og video kun
Oversett alle anmeldelser til Norsk (Berkmel)
Ray gear head
Tried this clamshell type pinion brg puller instead of the big name brand that costs 3-5 times more. I used it on Ford 9" pinion & it worked great and i had no issues at all. I believe this is a cost effective alternative that does the job as advertised.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Rick W Backyard Mech / Hobbiest
Used to pull worn carrier bearings off a Dana 80 diff. One bearing required the largest breaker-bar I owned and 2 people to hold the differential, but the tool held up great and manged to pop the bearing off without showing any signs of distress. I definitely recommend this for pulling these larger bearings.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
GGBell Sr.
I used this tool to made a mayor repair of the differential in my jeep commander, so I bought from VEVOR, This Puller did the work, but has problems of quality, the adjuster rings lose the alignment because of the threads are lousy, it is not a precision tools.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Erik Byman Works as it should
Storage stand does not securely hold all the pieces otherwise does a good job
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
MarkS It Works
It worked for removing my Jeep differential carrier bearings without damage. My only issue is all the clamps don't fit on the storage carrier, so I know I'll probably loose them at some point. I don't pull bearings that often
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Ma r Works
Prob but for commercial use but for me a weekend warrior it worked great pulling bearings repeatedly off my carrier. Would buy again.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
conan mr
I bought this because i mistakenly thought it would work on a Ford 10.5. It does work on the carrier bearings, but does not pull the pinion on a 10.5. I am also working on a Dana 60, and it works well on the Dana.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Michael Tool
Haven't used this as it won't work for my application. Need smaller clam shells in order for it to work for what I need it for.
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Aivaras Mr
Had to machine shaft to fit the casing, after that, works great, would buy again. ............................................................................................................
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
Shaun Electrician
Great concept. Just did not work as well as i would have liked. But did work after modifying. Videos should it be a lot easier to use than it was?
0 personer syntes dette var nyttig
Oversett anmeldelse til Norsk (Berkmel)
