Kundeanmeldelser for VEVOR-sett med komplett topplokk for Toyota 4Runner (1985-1995), Celica (1995), Helix Pickup (1985-1995) 2.4 SOHC (22R, 22RE, 22REC)

Alles super! Top Preis und Qualität! Schneller und unkomplizierter Ablauf und Versand. Gerne jederzeit wieder!

Excellent nice and good price the shipping one time .....................................................

came fast, quality product easy installation. would recommend 100% to anyone

Worked better than I expected. If you’re planning on running this in a similar engine. Here’s what I did. When I receive the heads I thoroughly inspected. I compared the spring tension to the stock ones that I pulled off and the valve springs in these heads had stiffer Springs, also seemed pretty consistent across all of them. I got a felpro multi layer steel head gasket. New Chinese high tensile head bolts from eBay, Also didn’t realize that I couldn’t run the original rocker arms so I had to buy Chinese stainless roller rockers from Amazon, chromoly push rods and guide. The stock pedestal rockers won’t work as the threads on these heads are larger . No biggie, do the math to make sure you order the right push rod length. Verify with a marker on the valves and cycled the engine. I also did this when it was 30° outside.. so I’m gonna take the upper intake off and valve covers and re-torque everything in the spring. Anyways, it’s running good and pulls strong.

They look good, the only problem is there is no specs for the valve springs. Can you run them with a roller cam etc?

Its great for the price, and for a stock engine. But if for a modified engine it is a great starting point. Small modifications are needed. The castings are are a great starting point, the valves and springs are good enough for stock engine but not a performance one, plus runners need to be cleaned up at minimum or ported for performance eng. But it is still a good starting point

I loooove the heads my only issue is finding spark plugs for them. Only place had the plugs for these heads was Napa and they cost 140 for 8. The plugs are NGK 953594. Plugs need to have a 25mm reach.

Was willing to take a chance on these for an engine build. Good price and appears to be good quality for our needs.

A GREAT piece and price. They already have Large ports. A really nice piece. Thanks

Purchased and installed.I checked head thoroughly before installation.All threaded holes and spring pressure and checked valves for leaks. I couldn't find one issue but I did take heed to warnings to use my original cam that measured same as cam that was on new head . At the time of this review my engine with new head has about 2 hours of run time and runs great . Time will tell . If any problems occur I will repost. I would have given five stars if I knew cam was usable but at this time definitely would purchase again if needed.