Kundeanmeldelser for VEVOR-sett med komplett topplokk for Toyota 4Runner (1985-1995), Celica (1995), Helix Pickup (1985-1995) 2.4 SOHC (22R, 22RE, 22REC)

came fast, quality product easy installation. would recommend 100% to anyone

Worked better than I expected. If you’re planning on running this in a similar engine. Here’s what I did. When I receive the heads I thoroughly inspected. I compared the spring tension to the stock ones that I pulled off and the valve springs in these heads had stiffer Springs, also seemed pretty consistent across all of them. I got a felpro multi layer steel head gasket. New Chinese high tensile head bolts from eBay, Also didn’t realize that I couldn’t run the original rocker arms so I had to buy Chinese stainless roller rockers from Amazon, chromoly push rods and guide. The stock pedestal rockers won’t work as the threads on these heads are larger . No biggie, do the math to make sure you order the right push rod length. Verify with a marker on the valves and cycled the engine. I also did this when it was 30° outside.. so I’m gonna take the upper intake off and valve covers and re-torque everything in the spring. Anyways, it’s running good and pulls strong.

Its great for the price, and for a stock engine. But if for a modified engine it is a great starting point. Small modifications are needed. The castings are are a great starting point, the valves and springs are good enough for stock engine but not a performance one, plus runners need to be cleaned up at minimum or ported for performance eng. But it is still a good starting point

I loooove the heads my only issue is finding spark plugs for them. Only place had the plugs for these heads was Napa and they cost 140 for 8. The plugs are NGK 953594. Plugs need to have a 25mm reach.

Was willing to take a chance on these for an engine build. Good price and appears to be good quality for our needs.

A GREAT piece and price. They already have Large ports. A really nice piece. Thanks

Great heads did a 650 hp build with these heads for a 6.4 power stroke and there still going strong after 2 yrs great product and killer price highly recommend just as good as the big name heads

So far so good. I was a little skeptical to order these heads but after seeing them in person they look to be made very well. Install went smooth and they definitely improved hp over stock 350 cast heads. Keeps the engine alot cooler aswell. They came well package incase in foam and double boxed.

Everything is great thanks

Recd heads in good condition. They were well packed. Not CNCed but may be cast off of CNCed template as they have very smooth runners and chamber. There are no casting seams. Running your finger over the surfaces shows smooth transitions from inlet to valve and valve to exhaust ports. Machined surfaces are polished. I don’t see any casting defects on the other areas such as bolt holes and spring and rocker arm platforms. The combustion chambers are dressed like you would see in a performance minded head. Have not installed but pleased so far with fit and finish. Reviews are not favorable for components. I will have machine ship give them a final check such as spring tensions and height. Thx.