Kundeanmeldelser for VEVOR 12V 5-8KW dieselluftvarmer med LCD-bryter, dieselvarmer med fjernkontroll og annet tilbehørssett, 12V 8KW parkeringsvarmer

PROS: 1) Easy to install and uses only about 1/2 gallon per 12 hours on lowest setting; 2) The timer is easy to use and you do not have to reset it everyday (make sure you keep the thing fueled); 3) Aside from the fuel pump noise ALL of these types have, purrs like a kitten and VERY QUIET fan; 4) LOVE the two different modes of operation (e.g., set temperature or set operating level). CONS: 1) Temperature offset is only programmable from the hardwired controller and ONLY allows minus nine (-9) offset. For my needs need at least minus twenty-five (-25) offset and that is even with the controller remotely mounted; 2) The clock is HORRIBLY INACCURATE and advances 3-5 minutes per day. Would be superb if the Bluetooth app allowed programming features found on the hardwired controller; 3) Altitude displayed on APP is in meters only and temperature in Celcius only; 4) Need to be able to program timer (et al) from Bluetooth app (AirHeaterBLE); 5) The key-fob remote is terribly designed. If you accidentally touch "Off" the unit shuts down and you have to wait about 5 minutes to be able to restart. On the surface this does not sound like a problem until you find yourself fumbling around in the dark (nighttime) to try to increase/decrease the temperature and accidentally shut it down; 6) Need to be able to program clock from Bluetooth all (AirHeaterBLE). NOTES: 1) Overall a great item and could be FANTASTIC with a few updates to the Bluetooth app (AirHeaterBLE); 2) MOST significantly, needs to have the ability to set TEMPERATURE OFFSET up to -25 (minus twenty-five) degrees as the controller shows FAR hotter than actual temperature and that is even after mounting it far away from the heater; 3) The Bluetooth app needs to have an ADVANCED SETTINGS page where all the features can be changed/monitored appropriately. Doing this would be easier than an (impossible) firmware upgrade to the hardwired controller (i.e., those already out in the field). Would purchase again without hesitation, but sure hope they update the Bluetooth app and fix the clock innacuracy (maybe sync to phone time???).

Had to fix line from tank to pump first of all. Never got the blue Tooth to work. My old one actually worked Better.

Melted after a 4 months of use as a tiny house anti freezing measures. Instructions could use work by someone who is fluent in english (Not Slander).

I really like the heat output and the compact design. I must say the description of managing the controls is less than clear. I still am not sure how to change the settings and could not find anything on line to go over step by step how to change the controls. Also, the fuel pump clunking is surprisingly loud. I am surprised the designers could not silence this better? As well, I think there needs to be more caution on the heat the exhaust pipe generates, it cannot be close to combustible materials, as it gets extremely hot.

It stopped running after 4 weeks. I ran it only at night. I am still waiting on vevor to see if they are going to send me parts or a new one. I think they need to send me a new one but I know that not going to happen,right now I would not recommend it.

Thermostat not dependable but using constant on works fine. Using bluetooth to turn on works but unit will shut down before the night is over. Not good if you are using to prevent water from freezing or heating anything critical. I us this one for heating mu battery room. If i manually turn it on low it stays on. If I set the temperature or turn it on with bluetooth it will work for a while then turn off.

I realize this is my fault for not looking closer but I would think they would in a more prominent way that this only has two wires hanging out the back. I had to grab a computer psu and solder it into the harness to power it. That or pay a couple hundred for a large enough inverter.

I give it the review I did cause it took over a week to get them when unpacked it the top front where handle is all bent up from being dropped. Then we open the instruction manual and the instructions are so jacked up the way they are written i still ain't got it figured out on just setting the time muchles anything else it can do. Kinda a wing and prayer when starting it up... So I am pleased with the heat it puts out but to get it to do just that well that's a total difference story...

I am a mechanical engineer, and the instructions were so poorly translated they make no sense. The instructions are almost useless and need to go on Utube to set it up. Even on UTUBE there are numerous control panel styles, and the setup is different for each one. I did finally get it to work, but I am not sure I could repeat the process. The most important part is to prime the unit, to get fuel into the burner. They would be well served to get someone who is well versed in Chinese and English to do a correct translation. I have other Vevor products, and the instructions were much better. Once you get it going, it works great.

So I thought this was a plug-in play system where you’d hook it up screw it in drill hole plug it in and it’d run but there’s this one other piece which you need which does not come with the kit and that’s the 140 amp to 12 V inverter or so. So I can plug it in without ruining the unit, vevor themselves don’t sell that particular part you’re gonna have to source it out which I did and I’m waiting on it to come I the mail…..