Kundeanmeldelser for VEVOR Delehode 4-tommers indekseringshode Fresehode 100 mm semiuniverselt delehode 4-tommers 3-kjeve chuck Delehodesett med indeksplater og bakdokke for presisjonsrotasjonsbord

This is a typical chinesium product, had to be stripped & cleaned, chuck jaws would hardly open when first unpacked had to dismantle & grind metal away to free up the internal circumference of the body. Allow around 2 hours to strip and clean the rough edges on all the parts when dismantled, once this is done the unit worked well. Still good value compared to top line expensive products.

Haven't used it yet but appears to be very good value for the price and arrived on time. Happy purchase.

Pretty hard to beat for the money. My only complaint is that the key ways are not machined on center. I ended up making new keys for the head and re cutting the key ways larger and making new keys for the tail stock.

Bonjour Nous vous remerçions de nous adresser la facture de cet achat par mail à [email protected] . Cordialement SAR A2C

nice peice, just dirty as heck. Needs to be torn down and cleaned prior to use. Not sure why it is not done at the plant when made.

Sehr gutes Preis/Leistungsverhältnis. Qualität gut bis auf Rundlauf der Backenfutteraufnahme. Wurde von mir nachgearbeitet. Rundlauf bei Lieferung : 0,35 (!) ; nach Nacharbeit : 0,02-0,03mm ....für den Preis eine sehr gute Wahl für den anspruchsvollen Bastler/Modellbauer.

Quite happy with my purchase overall. Just one bizarre thing about it: The graduations starting from 0 to 360 degrees start and end precisely but there is a discrepancy in the values of the graduations. For example if you start on 0 with degrees line and reference lines coinciding exactly and make 10 revs with the alidade, the 2 lines don't coincide on 90 degree position. How they could achieve this while performing the engraving beats me. You just have to rely on alidade and disc combination if accuracy is needed. Don't trust the graduations! Otherwise, excellent value for money and sturdy construction.

Le matériel est solide, bien fini, précis pour une utilisation amateur. Un regret que le nombre de trous de chasue rangee ne soit pas inscrit sur les disques

As usual with Vevor, ordering was fine with fast and free shipping! I look at all these Chinese machine tools as kits which have to be disassembled, cleaned, and reworked, then you probably have something that you can work with. This was no exception. Cleaned out all the grit and schwarf then reassembled. Once reassembled, there is .015" backlash which cannot be adjusted out without locking the whole thing up. I suspect alot of the backlash is because there is .009" of slop with the handle input shaft and its bearing sleeve. The output shaft thread protector would only thread half way, so the internal threads had to be recut. Indexing plates were unmarked and needed to be stamped with their correct number of holes. Chuck is OK with .003" runout. Disassembly, cleaning, and reassembly went fine. Body is not hardened, jaws and internal gears are. Overall, it is not bad for the price. Would have been nice to reduce the backlash more but beggars can't be choosers.

Gutes Preis-Leistungsverhältnis, Verarbeitung gut und sicher verpackt. Die Teilscheiben könnten eine Beschriftung haben