Kundeanmeldelser for VEVOR automatisk avisoleringsmaskin, 1,5 mm–30 mm elektrisk motorisert kabelavisoleringstang, 180 W, 18,3 m/min trådavskraper med synlig avisoleringsdybde, for resirkulering av kobberskrap

dit is een goed maschien Je krijgt extra onderdelen en bouten en moeren om het vast ge maken Top kwalliteit

Work 100% better than I expected. Bolted it to a board & used my cordless drill. Striped 3000 ft of #14 wire in about 3 hrs.

Descarna muito bem os fios finos e grossos. Até cabos de alimentação ao PT consegue, só temos que ajudar um pouco.Fiquei impressionado até trabalha muito bem.

Machine facile à utiliser fonctionne parfaitement , très performante,et déjà un très jolie débit de chantier,Ravi de mon achat

Awesome machine!!!! Works great

Works great!

I've been an electrician for 20 years hands down best thing I've ever bought for stripping wire

Strips solid and stranded wire great. Care must be taken with stranded wire to get the cutting wheels pressure adjusted over tighten will cause excessive cutting of strands and a messy result. Processed 200 lb of wire in three evenings . This more than paid for the tool.

Vevor really came through for us. After FedEx said the item was scanned on their truck, but it was not scanned into the facility, we knew there was a good chance we would not get this item. Reached out through Vevor and opened a ticket. The experience was actually easy to move through with Vevor. We have the item, it is exactly what we needed, and we are happy with the way it all worked out.

This thing is a beast. I stripped about 8000' of wire over the last few days, from 14 Guage to 3/0. 1000' of it was 3/0 wire that was 100' long per 3/0 strand. I laid the wire out straight with the machine on the ground and it pulled the 100' runs of 3/0 through with no problems. This saved me so much time. There is a learning curve for getting the blades and tension set right so that it cuts through the sheathing, but doesn't cut into the wire. This is especially important on small stranded wire. If it is to tight it will cut the stranded wire into pieces and when you try to rip the sheathing off, you will run into very very sharp cut peices of wire and they hurt. So yeah, learning curve. I would suggest separating your wire by size and set it up and cut all of the same size wire, before jumping to the next size wire, that way you don't have to keep adjusting it so much. There is of course some room for improvement with the machine, just like with anything else. But all in all, this thing is awesome. When I got the machine, the turn wheel to be able to spin it manually was the wrong size and wouldn't fit. So I contacted them and they sent out the correct part immediately. They were very responsive when I contacted them and even followed up with me to check on things. This was the first thing I had ordered from Vevor and so far, the experience has been great. I just ordered some stuff for a job I'm doing and plan on using these guys a lot more. Thanks