Kundeanmeldelser for VEVOR 9"/22,9 cm elektrisk betongsag våt-/tørrsag med vannpumpe og blad

Ich bin mit der Maschine sehr zufrieden

Great quality tool for a great quality price. I would recommend the purchase

Great tool worked as described easy to use . Worked right out of the box with no issues. The water hose helped cool down the blade

Top apparaat al veel plezier van gehad

I have used this to cut 40 feet of concrete so far and the blade is still in working condition. Use the water connection to reduce dust and lengthen the blades usefulness. Also, be prepared to use a 30 amp single pole connection to maximize its strength, speed, and circuit faults. It is compatible with 15-20 amp outlets, when making long difficult cuts it may cause a breaker switch to fault but if you don't mind flipping it every once in a while it still works great just go slower while cutting straight and in depth.

This saw (9") works great for occasional use. Using a bucket as a water supply is a little cumbersome to deal with, but for the price it can't be beat. Cuts through cinder block like butter and concrete is not a challenge either.

Saw worked very good for cutting a plumbing trench through 4" thick concrete. Only issue was it needed a 30 amp breaker to maintain running. If put under any load it blew the 20 amp breaker, once on a 30 amp it took no time to complete my cuts.

Work perfect, great value. “ I RECOMMEND IT “. Easy to use, of course “ WITH CARE” . The only thing that I recommend is need to improve the way of that little water pump is install.

My electric demo saw finally died half way through a job. I bought this as it is the same price as hiring one for 8hrs. It works a treat. It's a bit heavy but great value. Cheers

The saw and the blade are decent quality. I cut my driveay 4 inch concrete slab wit no problem (total 20 ft).The blade is still in good shape. The only complain I have is the water pump on/off switch. It only has one side attachment for the water tube. It should have in and out connections for the tubes. I had to drill hole on the outlet side to glue a 1/4 nozzle to connect the outlet tube. Do not press hard on the saw while cutting. Let the saw eat the concrete by itself, else it would pop the 20 amp circuit breaker. Overall, I’m happy with the purchase.