Kundeanmeldelser for VEVOR 14"/35,6 cm elektrisk betongsag våt-/tørrsag med vannpumpe og blad

All the stuff I bought from you’ve been very good

I got this tool cutting a lot of concrete. Had it over a year now. Strongly recommend this!

Für das einfache schneiden von Ziegel oder Randsteine (BETON) ist das Gerät für den Preis sehr gut. Hab eine ca 15cm starke Betonplatte mit ca 12mm bewährung durchtrennt da kommt das Gerät schon an seine Grenzen. Da kommt des öfteren der schutzschalter und man muss warten. Aber privat ist es okay für den Preis

Prima zaag gaat er door als was het boter erg tevreden mee

Great product . Cuts rock and concrete like butter

Good price/quality ratio. Easy to operate. Built in water hose is quité handy.

works good. I cut about 100'of concert and black top I put in a 30 Amp breaker and used a 12gage cord about 30 ft. The saw and blade did very well and cut in one pass. The key is to give the saw enough power so the motor dose not over heat and give the blade lots of water. I have been very pleased with every thing I have bought from Vevor

Capaz de cortar 16 metros lineales de muro de hormigon muy armado , eso si , para cortar muros hay que sujetar la maquina con un poli pasto o simliar , imposible ,por peso, sujetar con las manos . Para suelo o piezas apoyadas en horizontal ningun problema

The 14" Electric Concrete Saw REALLY works great, lots of torque. The price can't be beat especially when it comes with all the tubing and the water pump! PLUS a 14" Concrete Blade... I'm going to try it out with a metal cutting blade that is also a Diamond Based Blade. I don't think it will have any problems... I really like the design as instead of a direct drive off the motor it goes through a heavy duty 90 Degree gear set before the blade attachment. Much like the gas powered Maniac Saw used for cutting all kinds of material in construction business. It even has a nice set of wheels to draw it through a piece of concrete smoothly... If you want to use it with a base that allows you to adjust the depth it comes with that.. The only concern I have is the blade cover doesn't completely cover the blade when not in use which can be a hazard when setting it down after a cut is made... Most saws of this kind have a spring loaded blade cover that snaps shut as soon as you remove it from the material being cut... Much like a 7 1/4" Powered circular saw... So be careful when setting it down if the blade is still running... Other than that I would still buy it again and I probably will so I have one for CONCRETE cutting and one for STEEL cutting... I wouldn't use a fiber based blade in this saw nor a carbide tipped blade either without the addition of a additional cover for safety reasons. *** BE CAREFUL*** There is a reason I am comparing it with what we like to call a MANIAC SAW... One thing I forgot to add is there is a small bracket that helps hold the handle on 2 of the 4 screws do not have much of anything to grab onto thread wise. The hole that should be threaded goes completely through the handle as if it was made for a longer bolt and a nut. In my case it came loose as I was checking all the bolts to make sure they were tight... I couldn't tighten these 2 bolts as there are no threads in the handle to do so. Since the holes went strait through the handle I just got longer bolts and used locking nuts and this took care of the problem...

I had a more expensive Harbor Freight saw which didn't cut as well as the Vevor one. ALso the water feed on this one has a pump whiich is must more effective that the Harbor Freight one. Worked like a champ cutting through 6" slab. Oh, and the kicker, Vevor includes a concrete saw blade which didn't come with Harbor Freight. A much better saw for less. Pay less get more !