Kundeanmeldelser for VEVOR manuell papirkutter (opptil A3-papir, 400 ark kapasitet), papirkutter med spak, papirkutter med giljotin, høyeste presisjon, kontor, hjem, skole

I have had issues with this since the day it arrived. Customer service is awful! Instead of answering my question, they have to "Open a Ticket" and investigate. And then I have to wait up to 48 hours to get a response. The response I get does not even answer my question. The instruction manual that arrived with this trimmer shows a black bar that is attached to a white bar at the top of this trimmer. This is where I line up my paper to cut the size I want. This did not come in my box. It took over a week for someone to finally respond by saying they updated this with a magnetic item. The one that was in my box already had one of the magnets missing. It took days to get a response about the missing magnet. Finally they agree to send what is actually shown in the instruction booklet. What they do not let me know is that the white bar this is attached to has to be replaced, as well. The one that is on it now, does not come off. I asked for directions. Again, it took days to get a response. This was Vevor's answer to me, "There are not Instructions or Videos to show how to do this. Just take off the old and put on the new" The old DOES NOT come off. The 4th photo shows the white bar still attached and the new bar has an opening down the middle to slide the black bar back and forth. The last photo shows how the bar that came with this trimmer is attached. And still I cannot get it off, I don't know if it is welded or just really tightly fitted into these slots. There are little bits that go through the whole trimmer and I cannot get this off to install the new one. I have had this for over a month now and have been going back and forth with Customer Support. Never once could i simply ask a question and get an answer. Every questions takes days to get a response and the response never addresses the question I asked. After taking weeks back and forth with customer service. I gave up and just this week I tried to just use this trimmer. I line the paper up on the 8 inch mark. Each stack I try to slice comes out a different measurement. Photos 1 - 2 show the angle that gets cut. The top of the stack is 8 inches and by the bottom of the stack it is a no longer 8 inches, its more like 7 5/8. Its either cutting at an angle or squeezing the paper so much the paper is shifting as the blade cuts through. This is supposed to be HEAVY DUTY. Advertised as cutting though 400 sheets at a time. I cannot get it to cut though more than about 100 sheets of basic copy paper. and , like I said, It either cuts at an angle. Or it is shifting the paper as it is cutting. For the price I paid, I would expect to get accurate clean cuts. This is more aggravation than its worth. UPDATE: Vevor responded to me in regards to my review quicker than they did to any of my questions to customer support.

I would like to take this opportunity to share my experience with this cutter, emphasizing both the challenges encountered and potential areas for enhancement in a diplomatic manner. Initially, I faced a significant delay in obtaining the necessary missing handle, with a lengthy eight-day waiting period for customer service to confirm its requirement. Subsequently, I was informed that an additional wait of 15 days would be necessary for the handle to arrive. Upon receiving the cutter, I observed a few issues, including damaged feet, scratches in several areas, and the absence of the handle. Despite these concerns, I opted to retain the item due to the lengthy eight-month restock period I'd encountered. However, I believe it would have been beneficial if customer service could have extended a small refund for the damages. Such a gesture could have conveyed an acknowledgment of my concerns, particularly regarding the possibility that the items may have been second-hand, which was not addressed. In summary, while there are certainly areas for improvement in both the product and service, I appreciate the complexities surrounding product availability and customer service interactions. By addressing these issues, I believe future customers could enjoy a more positive experience. As and when I receive the Handle I will update this review.

I purchased this specific VEVOR 17" Heavy Duty Paper Cutter because the arm extender shown in the listing was connected to the base. I specifically did not want a magnetic extender, so that feature was a major reason I chose this model over other options. The cutter I received did not match what was advertised and instead came with a magnetic extender. When I contacted VEVOR, I was essentially told that they had changed the design and that this is simply how the product is made now. If the design has changed, the product listing, photos, and description should be updated to accurately show what customers will receive. I would not have purchased this model if the listing had shown a magnetic extender. It is frustrating to buy based on a specific advertised feature, receive something different, and then be told the design changed after the fact. Very disappointing experience with both the product listing and the way the issue was handled.

Super quick delivery, haven’t used it yet because it was delivered improperly. I didn’t receive the guillotine in the photo that has the crank for the paper holder but rather a flimsy magnetic one that, based on other reviews, doesn’t hold. It’s my first time ordering from Vevor, and I have to say I have massive mixed feelings given that I was happy with the speed of delivery but I didn’t get what I ordered. Update: I’ve used the guillotine about for about 15-20 cuts and now the handle for the pressure plate to hold the paper still is completely seized and I can’t seem to get anyone at Vevor to assist me and how to unseize it. Severely upset and disappointed with this experience so far. They also said they have discontinued the crank version to hold the paper in alignment and only do the magnetic one now as an FYI to future buyers. Second update: Been going back and forth with support now and told me to use a rod to get leverage to turn the seized handle (which I already told them I did). Then sent a video of them using a hammer to do so, so I used my own hammer to try and do exactly what they did and snapped the handle right off. I am infuriated at this purchase and the support. I’m requesting a refund and want this guillotine out of my house. Will add a final update once support gets back to me. Third update: Customer service offered me a full refund or a new product to replace the original. I just received the new one (which came with the crank which is so much better and paper doesn’t slide under it) and after about the 20th cut of 75 sheets of lined paper (MUCH less than the 400 mentioned for this cutter) the same handle stopped working AGAIN. This time it didn’t seize up, it now just spins as if it’s no longer connected to the pressure plate. Because it’s not. Hoping to have this one resolved otherwise a full refund has got to be on the way. Only bright side is the speed in delivery and speed in response times from customer service, otherwise this has not been good at all.

My order arrived and did not resemble the picture on the vevor site

Pieces not all received, supposed to cut 400 sheets and can barely cut 10 with out the stack shifting will pulling the handle down. Would not recommend at all!!!

Pass the buck on returns refund W ho on first Clowns

Very bad product. Absolutely impossible to adjust. Although after a few hours I managed to adjust the knife so that it cuts all the way, the whole mechanism bends the edges of the paper and even if it is fine, the press is unable to hold the stack, so the top part completely shifts and crumples. I tried to devote several days to it and somehow adjust it, but the mechanics are poorly thought out and cannot be used. I ask for a refund. I am very sorry, the product is otherwise solidly made. too bad

Ik hoop dat het alleen mijn snijder is. Maar het lukt me niet om elke keer een stapeltje van 4 tot 10 mm A3 goed te snijden. Elke keer moet ik weer de stelschroeven afstellen. Verder hoe strak ik ook de aandruk plaat vast zet op het papier het blijft richting de zij liniaal schuiven met als gevolg dat ik vrijwel altijd een vervelende duw vouw in het papier krijg. Verder is de uitvoering anders dan de afbeeldingen in de handleiding en de site!

La máquina tiene buena capacidad de corte pero a nivel estructural no está bien montada, es imposible alinear la cuchilla, la guía no tiene 90 grados, y la pieza prensa no ejerce presión homogénea a lo largo del taco, según avanza el corte se desplaza el taco hacia afuera dañando todo el material. Intenté hacer los ajustes con la llave Alen pero realmente la construcción deja mucho que desear. Las hojas finales solo las corta hasta la mitad lo que demuestra que es inalienable. Incluso probando a realizar una mayor presión se ha doblado el eje y no he conseguido mantener la alineación en el proceso de corte. Una pena, la máquina prometía y es pesada por lo que inicialmente parece robusta....pero no. También apuntar que tiene una deformación de la base y tuve que calzarla en una esquina. En fin, entiendo que ha sido barata pero realmente no me ha sido útil.