Kundeanmeldelser for VEVOR hydraulisk dekkkantbryter 10000 PSI fotpumpe for traktor- og lastebildekk

I bought this for a difficult job. Some old hard offroad tires. Eventually it did "help" with it, but it certainly wasn't a magic answer. The feet on it do not line up. This makes it impossible to push in between the rim and the bead. I pulled the two fixed feet off and milled about 180 thousandths off to get them close, and then slightly narrowed the leading edges of all three feet with an angle grinder. On soft rubber tires that weren't stuck in place that might have been enough, but for my application it was not. I had to partially upset the beads with a slide hammer breaker, and then HAMMER in the feet for the hydraulic bead breaker. At that point I stepped on the pedal and waiting around sipping on my coffee while it chugged away finally popping the bead off in one location. On every tire on each side, I had to press with the hydraulic bead breaker in three places each next to the last in order to get the bead to fully pop off. It was a lot of work, but I expect a tire company machine would have struggled too. Would I buy it again knowing what I know now. Maybe. The amount of time I spent would have easily paid for the cost of taking them to somebody else even if they charged extra because it was such a tough set of tires to remove. On other tires though I can see it being useful.

Great price going to pay for itself first use. Little heavy and bulky but built solid. Like how I can disconnect the air over hydraulic pump for other attachments if desired.

Très bien mais lourd et un peut trop large sinon parfait

Tarif intéressant mais lourd a l'utilisation sur pneu agricole. bon achat

Muy buen producto, aunque mejorar el embalaje y explicar un poco el uso, secir que va conectado al compresor de aire.

Bonjour, utilisé avec pompe hydraulique vevor pour décoller les pneus agricoles. Fonctionnel pour le prix. Difficile à utiliser car l'outil est très lourd, les coins sont trop larges pour entrer dans l'ouverture de la jante, les coins sont trop épais pour se glisser entre la jante et le talon du pneu, ce qui fait ressortir l'outil avant le décollage. Il manque un robinet en T pour gérer différemment le décollage du bridage sur la jante. Les coins sont facilement modifiables pour mieux convenir. L'outil permet d'être autonome à bas prix.

Jaws don’t line up so it slips off of rim. Heavier and bulkier than others I have used. Seems to have good power when it does stay on tractor rim. Better than not having one. Good tool but not the one I’d grab to use everyday if that’s all I did. Works on a farm where not using it all the time.

Bought this unit as a spare and that’s what it will be. The head is HEAVY to handle. The claw doesn’t have enough pull to pull the foot into the rim so you have to drive a dull chisel in to move the bead back to fully engage the foot. Pump seems ok but buyer beware of the shortcomings of the breaker itself. First try was a little 14.9x28 and with the items mentioned I was not impressed

Bead bracker works amazing. The hydraulic unit did not come with it in used my hand pump for my portapower worked great