Kundeanmeldelser for VEVOR Klesvasksokkel 686 mm B x 366 mm H, Vaskemaskin og tørketrommel sokkelplattform universal passform 299 kg kapasitet, kraftig multifunksjonell sokkel for vaskemaskin med skuff og rikt tilbehør

didn't get the brand name matching drawer because i would not be able to use it should i replace my dryer. tried but returned a different brand because the welds were already cracked when I got it and the sheet metal was thin and didn't seem stable. then I found this one and it is the perfect height, has an open top so I can route the dryer vent down and out the side behind the drawer to keep the dryer flush with my corner walls. Also this base is so sturdy i'm sure it will outlast my dryer and I can use it on my next one, too!

The item was no problem on assemble, it’s sturdy, but it could use extra metal straps to make it sturdier. I had to add 2 of them myself.

I bought this pedestal after abdominal surgery because I had trouble reaching the mini fridge contents from the floor. As I put it together, I realized that part C is the wrong size (about an inch or two too long), meaning the drawer is actually not functional. I would not suggest this model. Perhaps all the parts in other models actually fit together, but not this one.

I like everything about the product except one thing. My dryer is 27” and the product stated that it worked with 27” appliances. My dryer is not supported because the base is too small. This is a critical problem!

This is not 27" wide. It's 26 5/8". It will not support a laundry appliance that is 27" wide, which is an industry standard size. I applied for and received a full refund from Vevor. Proceed with caution and be certain of your compatibility.

Takes forever to assemble and needs to be modified if you want the drawer to be in line with the front (mounted as instructed it sticks out 1-2 cm). It feels sturdy but if you have a machine that vibrates/shakes a lot you should look for a pedestal with sturdier construction. I bought this because it looked much nicer than the ones I've had before that doesn't have a covered front, but they were much sturdier and isolated the vibrations. If your machine "walks" around when on the floor it will make this pedestal walk around as well. Was cheap though so can't really fault it, worth the price I guess but I would have paid more to get something sturdier.

Great quality for the price instructions could be a bit more descriptive and the size needs to be smaller to fit domestic front loaders as it’s much to deep for most household machines.

This is a great pedestal at a really good price. Unfortunately, the measurements in the pics are wrong. It is only 27" wide, and was too narrow for my 29" dryer. Also, the instructions have you install the top part with the lip facing upwards, but the pictures shown have the lip facing down. I tried it this way to see if I could make my dryer work, but I don't want to have it balancing on the edges off this, 14" above the ground.

Whilst the unit itself feels solid, the frame is too big and the width of the rails it sits on are too thin. I had to buy a plate to put on top so my washing machine didn't fall off the frame. I really don't understand why the rails are so thin. The draw when pulled out to get something at the back falls off it's left rail but remains on the right. My machine should have fit, we did measurements, not sure if I got this wrong thinking the rails would hold the footing of the machine.

It went together easily until it was time to install the drawer. I aligned the slider ends and pushed the drawer in and all the guts and bearings fell out of the inside of the slider on one side. I'm going to have drill out the rivets and replace the sliders with something better.