Kundeanmeldelser for VEVOR lærskjæremaskin, 14,2 x 10,2 tommers pregeplate Manuell formskjærer, 0,47 tommer trykkslag lærpregemaskin, doble styreaksler utstansingsmaskin for forskjellige materialer

I have af it for a few weeks. Really like the machine. Works great with my leather die cutters. Very heavy! I lifted myself but would have been a lot better with another pair of hands. Is very well constructed. There is no instruction manual so I had to go looking for setup instructions which wasn’t too hard to find. I highly recommend.

Presse conforme à mon achat, le poids aussi ! Prévoir deux personnes pour la soulever. Malheureusement j'ai un pas de vis qui n'est pas droit, ça n'a pas l'air de gêner le réglage mais c'est dommage pour ce prix . La plaque blanche prend vite les marques des emportes pièces, je vais devoir trouver autre chose par la suite. Sinon elle fonctionne correctement autant pour la découpe que pour faire un marquage, d'une figurine par exemple, plus profond.

Na 2x levering werd dit toestel in een houten kist geleverd. Zeer vriendelijke vrouw aan telefoon voor levering af te spreken. Nu al een aantal keer het toestel gebruikt en werkt prima. Helaas zonder ook maar een handleiding. Dit zou echter beter kunnen. Je moet zelf naar filmpjes op Youtube zoeken hoe je de hoogte aanpast. Er worden ook nog vijzen meegeleverd, geen idee waarvoor deze nodig zijn. Voor de rest het oranje is een lelijke kleur, helaas helemaal in het zwart is deze grote niet meer verkrijgbaar.

Perfect machine, heavy duty, no problems, shipped tight, nothing missing, very happy

It came quickly. It was as described. It was boxed up very well but there was damage to the box but the press was fine. There is an instruction book but it does not tell you anything about putting it together for adjusting. I had to watch a couple videos of other people with theirs to realize the cutting board was not attached with the four screws and that came with it. It works very well after I got it adjusted. I have no complaints.

14.2x10.2 Press is very solid & ridiculously heavy. Needed a press to repeatedly and consistently apply pressure in a vertical motion without side to side motion. Using with large 6”x5.5” top and bottom embossing plates for cardstock paper, if the press has any sideways movement, the plates would not line up and would become damaged . Needed to build a jig out of mdf for my purposes but the press performs the intended task incredibly well. There are only 3 minor issues that are probably not an issue for most users. First issue is that it weighs a little over 100 pounds. As such, you need a dedicated space to place it as it’s much too heavy to store away and bring out repeatedly. Second issue is that there’s very little vertical travel (approximately 5mm total) when you pull the lever to operate the press. For leather dies, where you have room to get your hand between the plates, to line things up, the vertical travel is likely just fine. I’m not using this for leather and a little more vertical travel would be a huge benefit. Third issue, the cardstock I’m working with requires the larger press in order to fit the paper between the 2 upright threaded posts. The upper press plate is very large at 10.2” wide and lining up the paper precisely is very difficult as a result. It would be nice if Vevor offered an optional plate that was maybe 6” wide. If there were more travel between the plates, that would solve the problem as well. Again, these are likely not issues for most users. This is marketed as an embossing press and sometimes embossing plates are a top and bottom plate, not just a top plate. The press works beautifully but you’ll need to get a little creative building a jig if you’re using this for top and bottom plate embossing. The press is very well built, all parts are solid and it will likely outlast me. For the price, it’s an absolute bargain. Some reviews mention the instructions are quite vague. There were no instructions in the crate when I unpacked it, so I can’t comment on how vague they are! I’m not sure why anyone would really need instructions though, it’s pretty straight forward. Undo the retaining nuts, level the plates, tighten the retaining nuts and use the press. It really couldn’t be more simple.

Très bien

heureusement, j'avais préparé le diable à la sortie du camion, on imagine pas à quel point c'est lourd ! Hyper bien emballée, livreur top, machine facile d'utilisation, propre ! MERCI

Très simple d'utilisation une fois qu'on a compris la subtilité du réglage. Réglage à refaire si on change de hauteur d'emporte-pièce. Si ce n'est ce détail, elle fait très bien le taf et pour son prix c'est un investissement que je ne regrette pas.

Gut verpackt angekommen. Funktioniert einwandfrei.