Kundeanmeldelser for VEVOR lineært føringsskinnesett, SBR20 800 mm, 2 stk. 31,5 tommer/800 mm SBR20 føringsskinner og 4 stk. SBR20UU glideblokker, lineærskinner og lagresett for automatiserte maskiner, DIY-prosjekt, CNC-rutemaskiner

Great product super happy with quality. Only wish it came with the hex head machine screws that match the slide blocks threads. That's my bad for not reading the description throughly as they are not listed in the kits materials list. Probably because the length needed may vary depending on the Guage of the material you plan to mount to. So heads up to potential buyers I recommend this product but you'll need 4 - m5 machine screws per slide block so 16 total for a two rail 4 block kit like this. Very inexpensive and available at any hardware store.

One of the rails arrived slightly bent - its base has a minor amount of wobble when placed on a flat surface - and the sliding blocks' travel mechanism is quite flimsy overall - made out of a fairly fragile plastic encasing the ball bearings. However, for the price, not a bad purchase. We'll see how it holds up over time.

Bonjour, Comment pouvons nous récupérer la facture de cette commande? Dans l'attente de votre retour. D'avance merci.

Great item exactly what I needed. I built a slide saw and it works perfectly. I certainly use this site again.

Hi The rails are good but strange that the distance between the srews in the blocks dont fit the distance of the holes in the rails. So if you install two longitudinal and two transverse rails you need to make now holes.

L'ensemble des rails en 1800mm et 1200mm semblent de qualité aprés déballage. A voir sur la durée, en particulier les roulements linéaires.

L'ensemble des rails en 1800mm et 1200mm semblent de qualité aprés déballage. A voir sur la durée, en particulier les roulements linéaires.

As per advertised delivery very quick very good web site to deal with and use I recommend Vevor and they don’t advertise products as in stock if they can’t deliver

The guide blocks for the two sets of rails are different sizes with different hole patterns. Also, the blocks for the 1200mm rails have through holes while the blocks on the 2200mm rails are not drilled all the way through. I can see no reason for the blocks to be different. This made measuring and drilling the acrylic pieces that came with the 2200mm rail much more difficult. In contrast the through holes on the 1200mm rail blocks made it very easy to mark and drill out the acrylic router plate. Please consider using the same through drilled blocks for ALL your guide rails and your future customers should be much happier with their purchases. You might also consider selling acrylic pieces that are designed to connect the guide blocks on the 2200mm guide to the end stops on the cross rails. Having the acrylic pieces all pre drilled would make assembly much easier. Thank you, Bob McRae [email protected]

Bonjour serait il possible d'avoir la facture correspondant à cet achat pour ma comptabilité. Merci Cordialement