Kundeanmeldelser for VEVOR lineært føringsskinnesett, SFC20 1200 mm, 2 stk. 47,2 tommer/1200 mm SFC20 føringsskinner 4 stk. SC20 glideblokker 4 stk. skinnestøtter, lineærskinner og lagresett for automatiserte maskiner CNC DIY-prosjekt

They are working great will buy more when needed. Telling everyone about them. purchased some high dollar ones before and yours are of equal quality. Thanks

This is the order that was held by a large shipping agent who only informed me that they had it after ringing to see what had happened to it. Vevor were very good but unfortunately I wouldn't recommend the shipping company.

I have received unbeatable service from VEVOR TOOLS with high quality products and at a price that I could afford.

See review I gave for the 2200mm rails which were in the same order. The guide blocks included with these rails are well designed and much easier to attach to my acrylic router plate because the mounting holes are drilled all the way through. I just laid the block on the acrylic and used the holes as a template for drilling. You should be using the same design blocks for the side rails!!!

The SBR cross rails were delivered on time, work perfectly and were easy to install and align on my flattening table.

Colis reçu dans les délais et conforme. Je recommande le site et les produits ... Je ne connaissais pas auparavant , mérite que l'on regarde de plus prêt.

The rails are wonderful and work as described. Quality piece. Would have been nice if screws were available as I had to go to hardware store and purchase screws. Also, I would have liked is if the Router Plate was made available, a plate with drilled out holes that match up with the rail slides. If I missed something, please respond back with a part number for the plate....if none available then I will have to make one.......would prefer one that is already made with perfectly aligned screw holes already made. Other than that, good quality and quick shipping...

I purchased this for a different use. I purchased to use as an adjustable projector mount. It gives me the ability to adjust the throw range without having to remount if I change projectors. Now I’m about to get a new projector. This setup will work, because I don’t have take it down. Very happy with my purchase. It’s made with high quality materials.

These rails were inexpensive and work great. If you are building your own router sled for planing your woodworking projects , these are what you need

The linear guide set SFC 20 1000mm and the linear guide set SBR16 1000mm are a good way to to DIY a router sled. The hardware and a way to combined them takes some finagling. It would be nice if an all in one package was available. Most router sleds run $250 on up to $800. I think I spent about $160 in all.