Kundeanmeldelser for VEVOR magnetbor, 1450 W motor 50 mm kjernebordiameter, 13000 N magnetisk kraft, bærbar elektrisk magnetborepresse med 6 kjernebor, variabel hastighet, boremaskin for metalloverflater, industriell

Odličan snažan alat

This is probably the smartest way of saving money. We drill more then 50 holes in 10mm steel beams. The only thing we had to do is to re-tighten the electrical connection as the magnetic part got disconnected few times. I recommend to use the tightening strap for safety. Otherwise, I fully recommend it

Máquina muito boa de trabalhar prática, tenho esta situação a remeter a agulha de abertura do líquido lubrificante partiu agradecia que me enviasse outra obrigado

Building process tanks from 8" sch 40 steel pipe. Each tank takes 5 fittings with o-lets. Drilling by hand or torching was less than satisfactory so I bought this Vevor magnetic drill. What a pleasure. It bores through the thick pipe wall with ease and leaves a clean hole. At first I was concerned that the magnetic base would be unstable on the curved surface of the pipe but it's easy to hold steady. I wouldn't recommend this without a pipe accessory on smaller diameters but on 8" pipe, it worked fine. $166 with a set of bits, it's an incredible value.

Bonne machine de bonne qualité avec une facilité d'utilisation surprenante. Très étonné à la vitesse où j'ai pu réaliser les trous que j'avais à percé. Le réservoir fait bien le travail aussi.

Bin sehr zufrieden. Funktioniert einwandfrei Hab mit der Magnetbohrmaschine schon mehrfach gearbeitet und würde sagen Preis Leistung ist mehr als okay.

This is a great drill for the price. I looked at many seemingly comparable ones and they all cost at least $800. I've been using this to drill out old bolts that have broken off on the side of my cast tractor casings. It's been more than up to the task. The magnet holds it reasonably firm and the drill itself is more than powerful enough. The bits have been able to drill into grade 8.8 bolts.

This drill is solid feeling and has a ton of adjustments available for many tasks. The magnet grips well to keep it in place. It has had no issues drilling any of the holes accurately. It is louder than I thought it would be but I wear ear protection normally anyway. This was a great addition to my tool kit and I will be using it a lot more.

muy buena maquina muy util

Worked better than I expected. I used a 11/16 vevor cutter and drilled 22 holes through 3/4 inch steel plate. And the bit is still in good shape. Also used the 2inch cutter and cut 16 holes through 5/8 steel and it is still sharp. I used cutting oil in drill and used hand pump oiler can for additional cooling. Probably not ideal for everyday use but for an occasional job it works great for the small investment.