Kundeanmeldelser for VEVOR manuell stangsag, 118-809,3 cm uttrekkbar stangtrebeskjærer, skarpt 65Mn stålblad, lett stang med glassfiberhåndtak, sag med dobbel krok for trimming av høye grener, beskjæringsverktøy for palmer, busker

Quality is good. You need to be strong to hold it when fully extended. Little bit wobbly too at full length. But did the job perfectly! Recommended to buy

Difficile de couper en longueur maximale compte tenu du poids et de la flexion mais bien utilisable pour longueurs intermédiaires

Well the saw I ordered was not the saw that was delivered. Everything was good except the saw I ordered was supposed to have locking pin buttons on the shafts!! IT DID NOT… Did it work as advertised, yes it cut and was the proper length. Cons: did not get the locking pins on the shafts And the saw blade guard does NOT lock on the blade properly. It is supposed to lock over the nuts on the blade head! It doesn’t so if you carry it make sure not to loose your blade cover Not as promised but it does cut

Bought it after a forest fire came within 100’ of my rural property August 1st, 2026, and it worked excellent to cut Pine and Fir tree branches overhanging my home, shop and other out buildings up 20 plus feet above ground level! I did have to get one of my 40 year old sons to “manhandle” it on branches above 15’ high, it got too heavy for this 70 yr old man to work it with added extensions on it, but my son handled it with ease!!

Fungerar bra att såga grenar på 4 meters höjd men på 8 meter är den svår att hantera men det går

Wenn man es am Ast dran hat geht es gut, die Säge ist sehr scharf. Schwierig hoch zu bringen, weil die Stange flexibel ist, braucht man schon Kraft. Am Ende habe ich mein Ziel erreicht. Die Gewinde muss man leicht einölen, rosten schnell.

Works great. I've used the blade several times now. Still sharp.

Très bon achat. Pas très lourd et efficace pour tailler des arbres fruitiers

Werkt goed, alleen een beetje zwaar met alle tussenstukken.

The blades and tube extensions are of decent quality. The only 2 issues I encountered was (a): keeping the threaded tubes tight when assembled and (b): handling the assemble weight of the combined tubes and saw blade. I used all the tubes, but one in order to reach the dead branch and I found that it was fairly awkward to control the saw blade due to the assemble weight. This also resulted in tube deflection which caused the threads in the tube assemble to loosen up a little, so I had to retighten them a couple of times. Overall it did the job for a good price and the saw blades themselves were very good and seemed durable.