Kundeanmeldelser for VEVOR mekanisk nøkkelfri inngangsdørlås, 14-sifret tastatur, dørlåssett for utendørs port med overflatemontert lås, vanntett sinklegering, tastatur og knott, enkel å installere, for hage, gårdsplass, garasje

Parfait

Very good quality item. Good for low thickness door

Needed to replace a non-fire-code compliant fixture, and wanted keyless entry as an option. This lock gives me both keyed and keyless as needed, and looks and works perfectly. Not quite as customizable on the code as I hoped but still good enough for my application. This door is a little thicker than the set was designed for, so used longer mounting screws and I re-used the square shaft from the original lockset.

Good stuff 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Very easy to install, great price. Highly recommend.

Am primit, am montat și funcționează excelent. Recomand la porțile pietonale încorporate unde nu se pot monta incuietoari electrice.

I like it very easy to set up and has a good quality.

Serrure de qualité je recommande

Wanted a non electric lock for a fence that could be open with a manual code. Turns out this is not easy to find. I found one on the homedepot website and ordered it. When it arrived, it was the Vevor lock. So when ordering a second one, I went straight to Vevor. The mechanics of the buttons and handle are good and the lock seems well made. Coding of the password was easy. Pro - Not expensive, can be outside, seems pretty sturdy, strong enough to keep a dual gate closed. Cons - Instructions are horrible. Main issue is getting one side of the lock (on the inside of the door) to connect to the other side of the lock on the outside. I can't stress enough how difficult this was. The pin that passes through the door needs to be placed into a tiny slot (see pic) and it is a shot in the dark. Even once in the slot it slips in and out. Eventually I had to use painter tapes to tape it in the small slot in order to be able to pass it through the hole in the door, have it stay in place, and be able to have it slip into the other side's slot. Without using the tape it kept slipping out. I highly recommend they upgrade this pin part into a better design. So that pin LOCKs into one side, so the pin stays in one place during installation. After using tape and getting installed I really do like the lock. Will see how well it holds up to weather but currently I think this is a winner!

Muy bueno