Kundeanmeldelser for VEVOR metallbensinbeholder, 20 l, bensinkanne med tut og komfortabelt håndtak, 6 l/min maks. strømningshastighet, lekkasjesikker og korrosjonsbestandig metallbensintank for de fleste biler, motorsykkel, ATV, UTV, rød, 2-pakninger

The spouts leak more than the previous design but still work ok. Better than the typical plastic can. Vevor is a great brand though.

The quality of the can itself seems to be good so far, but the spout leaves something to be desired. The spring action of the plunger is weak and slow, so you can't quickly stop the diesel fuel from pouring by simply lifting up on the can. And the retaining clip for the cap pops off with very little force, so that when you try to screw the cap on it flies away, causing you to hunt for it and it's spring or abandon it entirely. I would give 3.5 stars, but that isn't an option.

I bought 4 red and 1 yellow of the Vevor Upgraded Oil-Tight Metal Fuel Cans. There is a little piece of plastic which has a spring behind it (I found out) that keeps tenson on the spout as you tighten it down. Upon the very 1st fill-up at the gas station "2" of the red cans snapped the little plastic piece off and the spring shot out along with the plastic tensioner. I found the spring on the ground for 1 of them, but not the other. I like they are metal cans, but should be a handle on the back side to help hold it as you are filling your mower, etc.

Spring for lid broke immediately on first use. Arm of the can is worthless if I want to fill gas tank in car

The can is well built and I'm happy with the construction of the base. However, I can't say the same about the spout and seal. It leaks when trying to pour in holding down the childproof button. Ive tired tightening it down as far as it can go, and it still leaks. The spring on the lid popped out on the ratcheting side to tighten down. I feel the plastic and lid seal is poor quality, so if you need to pour out, don't use the childproof spout.

Not a standard Jerry can pouring nozzle it's like a gas can. 1 out of the 4 cans I purchased can't sit flat on the ground. Last it should have side handles so you can pour it easy.

These work and they are cheap. The cans are steel but the screw-necks are molded plastic, so you have to be careful not to knock them around. They have turn-locks to keep from unscrewing, but these fall off the first time you use them. They do have a handy pour-spout that stays closed until you push on it, but it doesn't close after you remove it. If you want to fill a car, you probably need a flexi-funnel or a a VP fuel jug to transfer it to. I prefer the Latvian NATO cans, but they are over $100/ea bought new.

I hate the nozzle

It said 'Jerry can'. 'Jerry cans' are coated on the inside!!

Le bec verseur n'est pas du tout pratique pour verser dans un réservoir autre que celui d'un véhicule.