Kundeanmeldelser for VEVOR hevet hagebed, metall, 2400x1200x600 mm, plantebed, grønnsaksbed, plantekasse med åpen bunn og avrundede kanter, stort blomsterbed, urtebed, ideelt for grønnsaker, blomster, urter og sukkulenter

I have mixed reviews on these beds. I bought A LOT of them- the ones that are about 12" high, 8 feet by 4 feet, and the 2 foot high ones, 8 feet by 4 feet. If you want to actually see the beds put together go to YouTube, look up Hickory Hill Homestead (light green logo) and you'll see a recent video there. There are a TON of bolts and wingnuts. I believe I counted 72 in total for the shorter beds and even more for the taller ones. You can imagine how long these took to put together. There are 4 total pieces of metal on each long side, 2 pieces of metal on the short sides, 4 corner pieces to hook the sides together, and 3 middle supports. One tip- do not put the bolts in on the bottom of the long sides because you have to add the supports, so it saves a tiny bit of time to wait until you put the supports in to add those bolts. Customer service did not make me happy as one of the shorter beds was missing a long piece to the long side and instead I had an extra piece of the short side. At first they offered me $20 as a refund on a nearly $80 raised bed. No thanks... give me a side piece so I can finish the bed. They said they could not and would not send me a new one. They finally gave me a $45 refund. That still does not make me happy at all.

I prefer last year's model. The inner support system is flimsy, and my container containers are buckled.

I bought it a week ago and filled it 3/4 to the top with soil. First, it was very easy to build, even though the instructions are inadequate. The finish is great and it looks good in the garden. I think there's insufficient support bracing from side to side. There's only one * shaped cross brace and the sides are starting to bulge out between the brace and the ends against the weight of the soil. I would happily pay more for 2 additional braces. I've used Vevor about 10 times and am very happy with the value and quality of everything I've received up to this point. I'll continue to be a customer but I'm skeptical about the durability of this raised bed.

I bought 6 of these to use in my vegetable gardens. To start, peeling the plastic off the panels was awful. It ripped and didn’t come off easily. Second, the metal edges are sharp! Even with the gloves that are provided, the metal cuts right through. My daughter was injured pretty badly with one of the edges just by walking past it as it was being built. Building was not bad, instructions were simple to follow. That’s probably the only pro to this product. Lastly, the beds are wobbly and not sturdy at all. Even with the center posts to keep it stable, once you add planting material, soil, etc they cave in anyway so pretty much pointless. I am actually really disappointed in these, for the price it could be better. Maybe use foam instead of the plastic sheeting covering every single inch that takes on average 2 hours to peel. Safety concerns are high with the metal sharp edges. That needs improvement asap before someone gets seriously hurt.

The 2ft deep beds are not well supported to prevent deforming from the weight of the dirt. The 1ft beds have 3 supports along the length to hold their shape but the 2ft deep have only one support in the middle. The design of this support has a central hub which will get pressed down and pull the sides in. To prevent this, you must cut a supporting piece to fit snugly under the hub and prevent it from moving. Then, slowly fill the bed from the outside edges in. Otherwise they tend to get pulled in and deformed. Otherwise, it's a good bed.

Also with this one no liner included , no protective band for the top . Those where in previous order that i have done .

Nearly every panel is scratched. Terrible.

There's a plastic wrap on the panels which was absolutely impossible to get off and one panel was scratched up. Structurally it's okay and setting up fairly straight forward but the instructions were very lacking.

Not a fan of wingnuts but it went together easily enough. Problem I had is metal is too thin . Bent one just positioning it

It's very hard to keep it straight.