Kundeanmeldelser for VEVOR MIG-sveisemaskin, 200A synergisk MIG-sveisemaskin, 4-i-1 gass-MIG/flukskjerne-MIG/elektrode/løft-TIG flerprosess-sveisemaskin med IGBT-inverterteknologi og LCD-skjerm

Hyvä toimiva laite !

Works great. Highly recommend for the price. Used it to wield 3/8 plate with great performance. It's a must buy fir a home owner

Very good welder with nice features. Pros: easy to use, it has a feature to store and load voltage and amp configurations (once I find a good configuration for a specific job I can store it (several banks are available) and then I can recall that configuration .ligh and handy. Cons. The pots are not very precise . It came with some electrodes for mig (0.8x2 and 1.0x2) but no outer cones nor specific cones for flux core wire (we can use the supplied gas cone but we have to clean it all the time.cables are short. We can buy those spares looking for mb15 mig torch reference.

Liten smidigt svets för det lilla garaget. Lättanvänd, Ingen super kvalitet men den gör sitt jobb. Så klart godkänd. 👍👍👍👍👍 av fem.

La máquina funciona bien, lo que pasa es que pedí una maquina sinergica y la q me mandaron no lo es

Goede prijs/ kwaliteitverhouding. Doet wat het moet doen, alleen jammer dat de tig-toorts niet via Vevor verkrijgbaar is. Nu met 1 mm massieve draad voor Fe in gebruik, werkt prima, nette lassen. Moet met mma nog testen.

Ok, first things first if you use the extension adapter they provide with this you rish a chance of starting a fire. It goes from a NEMA 6-50P to a NEMA 5-15R that’s a no no in the electricity world. So cut the end off the welders power input cord and wire it up with a NEMA 6-50P then you will get full and proper power to the welder to maximize its output capabilities. welder seems to run good. Haven’t had much chance to weld with it.

Machine runs well it’s all in mm size so you will need to convert it. All setting in the book are a good starting point. Only complaint is the leads are very short but what does a person expect for the money. Over all great machine.

Affordable and easy to use pulse mig. I don't think the automatic function works very well, but with manual adjustments you can get good results. I haven't had any problems the first time I used it. The mig welding handle is a bit lightweight, so not quite professional :)

I haven’t used the welder a hole lot ;the stick welder welds good &the wire does to I don’t like your book. It’s not the best thing to hard to read. Don’t say anything about how to use the welder on aluminum you say you can use the meg welder but not telling her anything about what to do in some settings you have and don’t quite understand them.