Kundeanmeldelser for VEVOR mobil base, vektkapasitet på 227 kg, justerbar fra 30 x 30 cm til 91 x 91 cm, kraftig universal mobil basestativ med svingbare hjul, for trebearbeidingsutstyr, båndsag, elektroverktøy, maskiner

Excellent heavy duty

Simple to build. Simple to put your machines onto it. Wheels roll very nice under heavy load. 4 spinning wheels was also ideal!

I have a large 600lb table saw and have been wanting a mobile base I found this one on vevor and thought everything Ive bought off vevor has been quality so why not and after a few days It arrived I took it out to my wood shop opened the box which was very nicely packaged removed everything and put saw on it, unfortunately I had to put 4 filler blocks front and back because It was too long and I didn't want to cut rails My base is around 20x20 so first attempt to push back in place Id pushed it off the base and it tilted forward after using 4 small wood blocks its fine and moves saw easy yes I could have cut the long rails and fit tight but just using the blocks works I would buy another no problem very heavy duty !!

Great mobile base; does just what I needed it to. I have an older Delta table saw and a Delta 6" planer mounted on a single heavy duty table so the total weight was very close to the 650-pound rating of the mobile base. It handles the weight easily and depressing the castors to relocate the combined machine is easy. It makes my small shop much easier to use by relocating the combined machine as needed. The hardest part of the whole assembly was lifting the combined machine and getting the mobile base under it. The table is long and narrow so raising it while ensuring it could not capsize was crucial. I would buy again.

It is well made and fairly easy to assemble. I would have created a rectangular square hole guide. E. G between 15.5 and 17 use hole ...That way it would be faster. On a related not it should have either a solid base, or a larger corner support for mounting the base. It can still slide around on top of the support. An alternative would be some large screws that pushed in on all sides of the base using the holes on the 4 sides. I'll probably build something to hold it still. Finally, the base is angled when set up for moving. I would have like to see the design keep it level and raise and lower floor stops, not the whole frame. It works but when you have a 500lb top heavy drill press it's a little never racking to roll it around on an angle.

Easy assembly, just follow instructions. rolls around smoothly and locks well too.

product is great make it easy to move things around

Cette base mobile est parfaite j'ai posé ma table scie dessus et ça me permet de déplacer ma ma scie table très facilement dans mon garage et de pouvoir la ranger aussi très facilement

Easy to assemble, very stout. Holds my 8in jointer great.

Just finished putting this together. Instructions were just OK... photos are WAY too small, otherwise ok. Packaging was excellent with all metal parts even bubblerwrapped. The steel components are very well painted and seem very sturdy. The "tires" on the four wheels are not plastic but a "rubbery" material that has some give - thus, the unit rolls smoothly and quietly - very nice movement! Improvements: 1) Better photos in the instructions and 2) plastic or rubber caps to go over the threads of the bolt that serves as an axle for the non-swivelling wheels as they stick out right at ankle level and 3) have a thicker plate for the adjustable floor pads to thread through (the tab on mine has at most 2 threads of engagement that hold all the weight on one end (or maybe weld a nut onto that tab to get more like 5 - 6 threads engaged)) Overall a very solid unit and feels like very high quallity when assembled. Would buy again. (and to help with the minimal thread engagement on the adjutable "feet" you could put the provided locking nut BELOW the table rather than above the tab as show in the instructions)