Kundeanmeldelser for VEVOR mobil base, kapasitet 600 kg, justerbar fra 51 x 61 cm til 74 x 89 cm, kraftig universal mobil basestativ med 4 svingbare hjul, for trebearbeidingsutstyr, båndsag, elektroverktøy, maskin

Heavy duty works great. No problems at all.

Well-made design with sufficient capacity. This base was for my heavy 20" Craftsman floor model drill press (took 2 of us to lift and tilt it back to its upright position). Mounting holes didn't line up exactly where I wanted, but I expected that. I welded mine together in lieu of using the supplied bolts.

I purchased this mobile base for my new Jet Drill Press that weighs 282 pounds. I found the base to be heavy duty and constructed and painted very well. The assembly was straight forward and intuitive. I used a piece of 3/4" plywood and bolted it down in the middle of the base and then mounted the drill press on the board. The base has very low clearance and thus minimizes increasing the overall height of the mounted item placed on the base. Love this base and will purchase this unit again for other large /heavy tools.

I purchased the mobile base for my Delta table saw. The quality is there and it works perfectly, so easy to maneuver around. I would highly recommend this product. So far everything I have purchased from Vevor has been very well built and excellent quality.

Another winner from VEVOR. I bought 2 of these, 1 for my Sawstop 3hp PCS and the other for my Jet 14” bandsaw. They are super heavy dudy and work perfectly. Thanks!

I had a base for my table saw but it wasn't built strong enough. It used 4 metal corner pieces with wheel casters held together with 2x2 lumber. This base is a beast. Easy to put together and very well built. You can adjust the length and width to suit your machine. My table saw weighs about 200 to 250 lbs. This will make it a lot easier to move around in and out of the garage for work around the house.

Worked out great for my planer thicknesses. I was easily able to cut down two of the bars to make it fit my machine.

As others note, this is a well-made and reasonably-priced product. However, it has a design detail that makes it a big disappointment *for my purposes* and possibly won't affect your use. Every other mobile base I have has a foot operated lever at each corner just as this one does. However, on the others, when you push the foot down, *the wheels* are lowered to raise the machine off of the stationary feet. This base does just the opposite- pressing the foot lever raises the machine via the stationary feet, and when the levers are lifted, *lowers* the machine onto the four wheels for transport. I have a heavy table saw (Saw Stop ICS) with a 54" extension table that has two legs for table support. I expected I would be able to *lower* the machine onto the roller stand's stationary feet (and hence, the extension's support legs) and *raise* the machine via the wheels which would raise the extension table legs enough for the machine to move. Big disappointment for me that it doesn't work that way. So give this some thought if the item you are moving has any load bearing anywhere other than the roller stand. Otherwise- the wheels are large enough to accommodate my not-perfectly-smooth concrete shop floor. You have to fiddle with the adjustments on the stationary feet to ensure they will clear any unevenness of the floor when the machine is lowered onto the wheels. I still don't have that dialed in quite right yet, but hopefully there is enough clearance to allow for that.