Kundeanmeldelser for VEVOR mobil base, kapasitet 600 kg, justerbar fra 51 x 61 cm til 74 x 89 cm, kraftig universal mobil basestativ med 4 svingbare hjul, for trebearbeidingsutstyr, båndsag, elektroverktøy, maskin

Heavy duty works great. No problems at all.

Well-made design with sufficient capacity. This base was for my heavy 20" Craftsman floor model drill press (took 2 of us to lift and tilt it back to its upright position). Mounting holes didn't line up exactly where I wanted, but I expected that. I welded mine together in lieu of using the supplied bolts.

I purchased this mobile base for my new Jet Drill Press that weighs 282 pounds. I found the base to be heavy duty and constructed and painted very well. The assembly was straight forward and intuitive. I used a piece of 3/4" plywood and bolted it down in the middle of the base and then mounted the drill press on the board. The base has very low clearance and thus minimizes increasing the overall height of the mounted item placed on the base. Love this base and will purchase this unit again for other large /heavy tools.

I purchased the mobile base for my Delta table saw. The quality is there and it works perfectly, so easy to maneuver around. I would highly recommend this product. So far everything I have purchased from Vevor has been very well built and excellent quality.

Another winner from VEVOR. I bought 2 of these, 1 for my Sawstop 3hp PCS and the other for my Jet 14” bandsaw. They are super heavy dudy and work perfectly. Thanks!

I had a base for my table saw but it wasn't built strong enough. It used 4 metal corner pieces with wheel casters held together with 2x2 lumber. This base is a beast. Easy to put together and very well built. You can adjust the length and width to suit your machine. My table saw weighs about 200 to 250 lbs. This will make it a lot easier to move around in and out of the garage for work around the house.

Worked out great for my planer thicknesses. I was easily able to cut down two of the bars to make it fit my machine.

I use a lot of mobile bases as I like to have wheels on everything tools, shelves, etc. I already owned multiple of the "name brand" bases with the same specs as these and decided to try the Vevor version. These mobile bases are almost exactly the same as the "name brand" version with some very tiny differences: Vevor is painted black, vs name brand grey, vevor uses lock washers on the bolts, name brand uses nylock nuts, the long rails of the vevor have enlongated holes for slightly more fine adjustment of size, name brand has round holes so their size is only in the 1 inch increments. Vevor seems to have the same quality of welds. Vevor's version is about half the price! Overall very happy and now have multiple of them.

Utilisé pour déplacer une lourde dégauchisseuse. Cela fonctionne parfaitement et je vais équipé d'autres machines. la seule modification que j'ai apportée est une fixation par des boulons M8 traversant préféré à la solution d'origine dans laquelle les M8 se vissent sur la contreplaque qui est filetée mais à mon avis avec trop peu de filets en prise. Cette modif permet d'augmenter la hauteur du socle, pour les charges lourdes comme dans mon cas. J'ajoute une mention 5 étoiles pour le sav qui a réglé très efficacement un soucis de conditionnement.

A bit challenging to put together. Maker sure you think about the way you want your item to face BEFORE you assemble. If your item has doors (like mine) you need to be certain they can open when you place them on the base. It is surprising easy to move an item around. I bought an electronic paper cutter (VEVOR 19" Electric Paper Cutter, Heavy Duty Paper Trimmer) It weighs 300+ pounds when assembled with stand. With this base I can easily move it around my shop. Great purchase. VEVOR should list this as an add on when you purchase.