Kundeanmeldelser for VEVOR Murphy-sengsett, queen-size, deluxe DIY-veggseng mekanisk maskinvaresett, pneumatisk spak kraftig sengerammestøtte, sammenleggbart skap veggseng plassbesparende design for gjesterom, enkel å bygge

I pistoni sono troppo esagerati, con un carico a vuoto sale da solo a momenti nemmeno tocca terra.... La struttura in compenso è molto facile da usare ..... Peccato per i pistoni xxl

Not yet installed yet. Murpy bedeutet are 1000 Eur herein in Germany... so I will give IT a try with this Kit.

robust ,sanatos.cam la ce ma asteptam

I recently purchased this Murphy bed kit, and overall it works as intended — but the design of the legs really needs a rethink. The way the legs are fastened to the mounting plate is not ideal. The threaded insert that the legs screw into can easily come loose from the plate, which makes the whole setup feel less secure than it should. A redesigned leg connection would make a big difference in both durability and user confidence.

The set is a very efficient basis for a wall bed. Be aware that making the furniture is tough work and requires some craftman's skill. The product is very good and according to specifications. Be sure to follow instructions on the size or understand the distances between the items. I reduced the size from 160cm to 140cm and adapted the construction accordingly. It worked well. The provided "minimum weight" for the bed has to be taken serious: the gas pressure spring will otherwise pull the bed up.

Excellent quality product. Instructions we clearly and easy to follow. All components were of a high standard and clearly labelled. Good child-safe gas struts prevent it dropping while opening. If using with lighter mattresses extra weight will need to be added to keep the bed down (I used a small concrete slab) Would recommend!

Hardware is very solid and good quality. Instructions are very poor, all measurements are in metric, required material is 1" plywood along with 3/4" plywood. Most people in Canada would use only 3/4" plywood for complete build. Converting the measurements is confusing because the metric to inch conversions are unusual sizes and the tolerances are somewhat tight. I am a cabinet/furniture maker with a large shop and I found it complicated build. Just rewrite the instructions with your material choice and convert everything to imperial if that is what you prefer. it is still a much cheaper kit than a lot of the others with the fancy instructions.

good quality product, but the plan is designed for the use of 1 inch materials and not the industry standard, example melamine which is 5/8 inch (16 mm) or 3/4 (19mm)

The instruction are good but incomplete in places. Every part needs to be discussed and measurements given for placement. As well the building support group was very unhelpful.

Buono