Kundeanmeldelser for VEVOR Murphy-sengsett, twinstørrelse, vertikal deluxe DIY-veggseng mekanisk maskinvaresett, pneumatisk spak kraftig sengerammestøtte, sammenleggbart skap veggseng plassbesparende design for gjesterom

I pistoni sono troppo esagerati, con un carico a vuoto sale da solo a momenti nemmeno tocca terra.... La struttura in compenso è molto facile da usare ..... Peccato per i pistoni xxl

Not yet installed yet. Murpy bedeutet are 1000 Eur herein in Germany... so I will give IT a try with this Kit.

robust ,sanatos.cam la ce ma asteptam

The set is a very efficient basis for a wall bed. Be aware that making the furniture is tough work and requires some craftman's skill. The product is very good and according to specifications. Be sure to follow instructions on the size or understand the distances between the items. I reduced the size from 160cm to 140cm and adapted the construction accordingly. It worked well. The provided "minimum weight" for the bed has to be taken serious: the gas pressure spring will otherwise pull the bed up.

Great Hardware, easy enough to follow directions. The one thing that gave me a headache was converting all the metric to Imperial.

Zoals eerder gemeld heb ik wat gezondheid problemen en ziekenhuis geweest voor enige tijd en heb tot op heden geen verdere stappen kunnen nemen om het bed en systeem voor kast verder uit te werken nog maar eet geen brood heb goed heb gehele pakket op goede plek opgeborgen tot alles weer hopelijk beter is om begin te maken binnenkort. Het pakket zag er in ieder geval goed uit goed verpakt en snel geleverd in ieder geval. Zodra meer weet hoe en wat zal zeker bericht sturen enz. mvg Marcel Bussing

Excellent quality product. Instructions we clearly and easy to follow. All components were of a high standard and clearly labelled. Good child-safe gas struts prevent it dropping while opening. If using with lighter mattresses extra weight will need to be added to keep the bed down (I used a small concrete slab) Would recommend!

Hardware is very solid and good quality. Instructions are very poor, all measurements are in metric, required material is 1" plywood along with 3/4" plywood. Most people in Canada would use only 3/4" plywood for complete build. Converting the measurements is confusing because the metric to inch conversions are unusual sizes and the tolerances are somewhat tight. I am a cabinet/furniture maker with a large shop and I found it complicated build. Just rewrite the instructions with your material choice and convert everything to imperial if that is what you prefer. it is still a much cheaper kit than a lot of the others with the fancy instructions.

good quality product, but the plan is designed for the use of 1 inch materials and not the industry standard, example melamine which is 5/8 inch (16 mm) or 3/4 (19mm)

Buono