Kundeanmeldelser for VEVOR Malerboks DIY spraymaling beskyttende telt 950W, blå 4 x 2,2 x 2,35m maletelt 210D Oxford-stoff spraymalingstelt bærbart spraymalingsstativ DIY spraymaling

Easy to set up and use, but if you can, go with the next size up. The space fills up fast when trying to spray cabinets and gat all surfaces

This paint booth worked extremely well and was very easy to use. It did exactly what is suppose to. The only thing I would would like to have seen was the ventilation blower equipped with a filter.

Alles Super, läst sich damit gut Arbeiten. Leichter Aufbau und Abbau. Schnell geliefert. Gut verpackt.

Works great. Nothing more to say since it's obvious, however Vevor ignorant site is forcing me to add more words just to post.

This booth is easy to set up. I was able to fit my convertible in it fully with room to work. A bigger vehicle may be tight. The clean room works well. Spraying primer and base coat went well. Clear coat needed a little more ventilation. Overall a nice budget booth.

It’s a great product and easy to set up. Only downfall is can’t get replacement filters for it. Have painted 5 cars out of it and a world of difference since

goo product, quick to inflate , lots of room inside, the only thing it’s the filter get clogged easily

un peu de difficultés pour l'installer vu son poids et sa superficie. Maintenant il correspond +/- aux dimensions dont j'ai besoin. Ce qui est génant, c'est qu'il faut laisser tourner la soufflerie tout le temps. Je pensais qu'une fois installé, on pouvait la débrancher et placer une sorte de bouchon. Facile à utiliser mais après l'installartion.

It arrived quickly, I recommend it. It inflates quickly and is a good size. I put filters on so as not to contaminate the paint. Be careful with the rain.

We do custom and restoration work on muscle cars, classics, and trucks etc. we bought the 26x15 booth and it is big enough to put the entire car in it and have plenty of room to paint. The ventilation design is lacking however we solved that by attaching a 4” PVC pipe from the ventilation inlet through the clean room into the paint area. We substituted a 950 watt fan for the 350 watt for the ventilation and PROBLEM SOLVED! 5 minutes to put up and about 20 min to take down and that gets faster each time. Total of 750.00 for everything. It’s warm in the booth and we ran a hose from the shop’s a/c vent straight to the ventilation fan with filters and that helped. Still could be some cooler. Fans are surprisingly quiet also.